MED128022CSENGD- -  -  N- B15 BLIND HINGED DOOR WITH ESCAPE - B15DHB1G -N- S- S- -05/04/2022- Marine Equipment- - SN- S- - N-  - 597,421B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED128022CS- N-Apr 4, 2027597421
 
Form
  Marine Equipment(TO)
Certification N. MED128022CS - (ENG)
Certificate date 05/04/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
B15 BLIND HINGED DOOR WITH ESCAPE - B15DHB1G
Applicant BLU BUD SRL
Place of requester VIA FIESCHI 20/9  %  16121 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108601379, 0108183053, info@blubud.it
Directive (EU) 2021/1158
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 28/3/2022
Validity 04/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED128022CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type B15 BLIND HINGED DOOR WITH ESCAPE - B15DHB1G
Applicant BLU BUD
VIA FIESCHI 20/9,16121 GENOVA (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 5, 2022
April 4, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED128022CS
Page 1 of 2

Product description

Single leaf hinged door with maximum clear light of 1000x2100 mm (WxH). The leaf, having maximum dimensions of 1030x2110 mm (WxH) is composed of two steel sheets, 1 mm thick each and, in between, the insulating material composed of one layer of mineral wool type PAROC MARINE SLAB 150, 40 mm thick and having density of 150 kg/m3. The door frame is composed of an hollow steel profile having thickness of 1.5 mm. The leaf may be fitted, in the lower side, with a removable panel having maximum dimensions of 590x590 mm fitted with a ventilation louvre having maximum dimensions of 380x192 mm (WxH).

Field of application
Fire resistant B-15 Class single leaf hinged door.
Reference documents
BLU BUD drawing No. B15DHB1G Rev. 1 dated 30 March 2017 approved on 5 April 2017 with endorsement No. LABS-1446.
Tests carried out
Test as per RINA Test Laboratory report No. 2016CS013192 issued on 5 April 2017 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED128022CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****