FAB324122WSENG- -  -  N- Elbows, Tees, Crosses, Reducers, Caps -N- S- S- -10/10/2022- Fabbricanti Approvati- - NN- N- - S-  - 1,181,617BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB324122WS- N-Oct 9, 20271181617
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB324122WS - (ENG)
Certificate date 10/10/2022
Type Approvazione di fabbricanti di materiali
Product Tubi e fittings in acciaio

Model or Denomin.
Items
Elbows, Tees, Crosses, Reducers, Caps
Applicant Yangzhou Huazhan Pipe Fittings Co., Ltd.
Place of requester No.10, Shengnan Road, Chengnan Industrial Zone, Baoying County Yangzhou (Jiangsu)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 09/10/2027
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB324122WS
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel pipes and fittings
Type Elbows, Tees, Crosses, Reducers, Caps
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until October 9, 2027
_________________________________
RINA Services S.p.A.
Hong Gu
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB324122WS
Enclosure - Page 1 of 1
Flange, Elbow, Tee, Reducer, Crosse, Cap

APPROVAL CONDITIONS


Approval Particular:

Item
Material
Delivery condition
Size ( mm)
Max. Wall thickness (mm)
Pipe fittings
(Elbows, Tees, Crosses, Reducers, Caps)
C & C-Mn steel
N, A
DN15-600
31
Alloy steel
N+T
DN15-600
31
Stainless steel (WP304, WP304L, WP316, WP316L, S31802, S32205, S32750, S32760)
Solution
DN15-600
18

N-Normalised, T-Tempered, A-Annealing,

Survey conditions: The chemical composition and the mechanical properties are to be in accordance with the RINA requirements.

Note: The raw materials are to be produced by RINA approved manufacturer

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine October 10, 2022
**** NOTICE: This is NOT an official certificate ****