General Description:
The Octopus system is an air-cooled Lithium-Ion Nickel Manganese Cobalt (NMC) battery-based energy storage system. The system consist of two main components: the string controller (SC) and the battery module (BM). Additionally, a system controller can be added to the system.
The string controller comprises: high power board, emergency stop board and string controller board.
Ratings:
| High Energy | High Power | Lite |
| Chemistry | Lithium Ion NMC (Nickel Maganese Cobalt) |
| Cell configuration | 14S4P |
| Max voltage | 57.4 V DC |
| Min voltage | 47.6 V DC |
| Rated capacity | 192 Ah | 112 Ah | 192 Ah |
| Energy | 10 kWh | 5.8 kWh | 10 kWh |
|
|
|
|
| String |
|
|
|
| Max no. of modules | 18 |
| Max voltage | 1033 V DC |
| Max energy | 180 kWh | 108 kWh | 180 kWh |
Software:
SC MPU: V2.0.xxx
SC MCU: V1.2.xxx
SC FPGA: V1.1.xxx
MC MCU: V1.3.xxx
MCU FPGA: V1.2.xxx
Battery Management System (BMS)
The status of each module is monitored by the BMS:
- individual cell voltage
- battery current
- cell temperatures
- perform cell balancing in a string
- perform active balancing between individual packs
- perform safe guard functions (e.g. over/under voltage, over/under temperatures, ...)
Battery Control Unit (BCU)
The Battery Control Unit connects (switch ON/OFF) the modules the system DC-bus. The BCU measures string current, string voltage and DC bus voltage.
TYPE APPROVAL CERTIFICATE
No. ELE346624XG
Enclosure - Page 2 of 2
Battery System
Octopus HP, Octopus HE, Octopus Lite
String Controller (SC)
- The string controller connects (switch ON/OFF) the modules system DC-bus. The SC measures string current, voltage and DC bus voltage. The SC consist of a pre-charge system.
- user interface
- communication with external systems
- interface to peripheral devices and sensors
Remarks:
- Each particular application and installation such as electric propulsion and essential services, or for the charging/discharging of battery systems of a capacity of 50 kWh or above are to be specifically approved.
- Batteries are to be subject to functional and safety tests according to IEC Publication 62620 or in accordance with other equivalent national or international standards recognized by RINA.
- Performance tests (Factory Acceptance Test) are to be carried out on the battery system (BMS and Battery Cells) according to a test program and which is to include functional tests (alarm system, safety system, control system, etc.) and further tests resulting from the Risk Assessment at the presence of a RINA Surveyor.
- The battery system is to be used in connection with an appropriate Power Management System (PMS) able to shut down the battery pack in case of an identified failure.
- Installation of the battery system is to be in accordance with RINA Rules for the Certification, Installation and Testing of Lithium Based Storage Batteries.
- The battery system is not to be installed on the bridge or deck zone.
- This Type Approval Certificate does not cover any Flag Administration requirements.
Documents:
OCTO,003,Communication Reference Manual Octopus Systems v0.7; OCTO,006,EST Battery Rack (24R) Manual (V3); OCTO,007,OCTO,20220211,005,System Description; OCTO,008,OCTO,20220524,REP,002,Software Quality Document; OCTO,009,OCTO,20220610,MAN,007,Safety Description Document; OCTO,010,OCTO,20220610,MAN,009,Installation and Operation Manual; OCTO,012,OCTO,20230110,REP,003,FMEA Octopus Series; OCTO,013,OCTO,20240329,MAN,002, MSDS; OCTO,015,System Architecture V1.5; OCTO,016,System Controller - Communication Reference Manual 0.4 pre-release;
Test Reports:
- 2273002.60,IP65,Report;
- DSS,SZES2302000762BA - Test Report for 48V;
- DSS,SZES2302000763BA-Test Report for 28V;
- OCTO-017B,TRF,085-282260016-000;
- OCTO,001,080701Q - Environmental test report,signed DNV 9-11-2022;
- OCTO,002,310501P Vibration Test report signed;
- OCTO,005,EMC Report - 20210820RPT03;
- OCTO,011,OCTO,20221014,TES,002,Propagation test;
- OCTO,014,Propagation report Octopus High Energy module;
- OCTO,018B,TRF,085-282260149-000; |
|