ENGGN08/02/2016
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED351415CS
Certificate date 2/8/16
Type Prevenzione dell'inquinamento marino
Directive 2014/93/EU
Product Sistemi di trattamento dei gas di scarico a bordo
Item Nº A.1/2.10
Model ECO-DeSOx
Identification 15-038-APC-SC-100 DG3
Intended for ship COSTA PACIFICA
Applicant CARNIVAL CORP.
Place of requester 3655 NW 87 AVENUE MSOP 301N MIAMI  % U.S.A.
Tel. N.,Fax, Email 001 305 5992600, 001 305 5994670, ---
Standards IMO Res. MEPC.184(59)
Responsible Office GENOVA



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED351415CS

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/2.10
Description On board exhaust gas cleaning systems
Model ECO-DeSOx
Identification 15-038-APC-SC-100 DG3
Intended for ship COSTA PACIFICA
Applicant CARNIVAL CORP.
3655 NW 87 AVENUE MSOP 301N MIAMI
U.S.A.
Testing standards IMO Res. MEPC.259(68)
    
Issued at Genoa 
on February 8, 2016

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /16
 

________________________________________
RINA Services S.p.A. - Luca Varini
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED351415CS

Verified components of the equipment (with serial number)
15-038-APC-SC-100 DG3
Intended for ship COSTA PACIFICA
Technical documentation
PRMT-12401 approved on 20 November  2015 : “COSTA PACIFICA DG#3 PUMPS” - 15-038-APC-PID-0PM-R01
PRMT-12402 approved on 20 November 2015 : “COSTA PACIFICA DG#3 - DG#3 SCRUBBER” - 15-038-APC-PID-3SC-R01

PRMT-12405 approved on 20 November  2015 : “Exhaust Gas Cleaning System – Onboard Monitoring Manual” –  15-038-APC-OMM Rev.28thOctober2015

PRMT-12404 approved on 20 November  2015 : “Exhaust Gas Cleaning System – Technical Manual – Scheme B” – 15-038-APC-ETM-B Rev.28thOctober2015

PRMT-12406 approved on 20 November 2015 : “SOx Emissions Compliance Plan” – 15-038-APC-SECP Rev.28thOctober2015

- - - - - - - - - - - - -

ECG System ECO-DeSOx consisting of the following verified components:

EGC tower (ECOSPRAY TECHNOLOGIES / ECO-DeSOx / 15-038-APC-SC-100 DG3)
Sprayer nozzles (PNR / AAU2780L61 / AAU3194N6SG)
SW Pump (POMPE GARBARINO / MU200-315L)
SW Pump Motor (ABB / M3BP 315MLA4)
Dilution Pump (POMPE GARBARINO / MU250-250LDS)
Dilution Pump Motor (ABB / M3BP 280SMB6)
Automatic Self-Cleaning SW Filter (Filtrex / ACB-955-300)
Static Mixer (ECOSPRAY TECHNOLOGIES / SM01-300/400)
PAH Sensors (Hach Lange / FP 360 sc)
pH Sensors (Hach Lange / pHD sc Digital Differential pH)
Turbidity Sensors (Hach Lange / Ultraturb sc)
Free O2 Sensor (Hach Lange /  LDO Sensor)
Conductivity Sensor (Hach Lange / 3700 sc)
Gas Analyzer (Kittiwake Procal Ltd. / PROCAL 2000)
SW Pump Inverter (Danfoss / FC-102N200T4E54H2TGR3)
Dilution Pump Inverter (Danfoss / FC- 102P55KT4P55H5TGC1)
PLC Panel (ECOSPRAY TECHNOLOGIES / Main Panel 01)
VDU Touchscreen 10” (SIEMENS / 6AV6643-0CD01-1AX1)
- - - - - - - - - -
Tests carried out:

EGCS Statutory Survey Report, doc. No. 2015CS013514.
RINA job. ID. RS/2015/CS/01/3515 and RS/2015/CS/01/872 and RS/2015/CS/01/3514

Limitation on the acceptance or use of the product
In scheme B, according to MEPC.259(68), compliance with emission requirements is demonstrated by continuous exhaust gas monitoring. EGCS acceptance and use to be within the terms and conditions of “Procedure for Compliance” at Para. 6 of PRMT-12406 approved on 5th November 2015 : “SOx Emissions Compliance Plan” – 15-038-APC-SECP. Monitoring system is subject to periodic surveys by RINA according to MEPC.259(68).
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Luca Varini
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****