Dual-purpose type nozzles (Spray/Jet type) model Hand-held branch pipes for fire service use - Combination branch pipes PN 16.
Type | QLD6.0/6.5-40YA | QLD6.0/6.5-50YA | QLD6.0/6.5-65YA |
Working Pressure | 6 bar | 6 bar | 6 bar |
Nominal Diameter | 40 mm | 50 mm | 65 mm |
Nozzle Diameter (mm) | 12 | 12 | 12 |
Flow Rate at Straight Jet
(6 bar) (L/min) | 216 (*)
217.3 (**) | 222.8 (*)
223.1 (**) | 229.5 (*)
230.4 (**) |
Effective Throw (6 bar) (m) | 28 (*)
28.2 (**) | 29 (*)
29.6 (**) | 30 (*)
30.5 (**) |
Spray Angle (6 bar) | > 30°
(max.125°) | > 30°
(max.120°) | > 30°
(max.125°) |
Mass (Kg) | 1.5 (*) | 1.6 (*) | 1.6 (*) |
Note:
(*) Data based on Main Technical Parameters of the Product: SHFP-22517.
(**) Data based on Test Report: SHFP-22518. |
Field of Application
Dual-purpose type nozzles (Spray/Jet type) to be used in conjunction with hoses for fire fighting purposes on board ships.
The dual-purpose type nozzle may be equipped with fixed couplings as well, if the operability of the nozzle is not impaired.
Each product is to be supplied with its manual for use and maintenance.
 | ATTACHMENT TO
CERTIFICATE No. MED009123WS
Page 2 of 3 |
Continued:Reference Documents
- Bill of Material, filed by RINA with No.: SHFP-22511;
- Data Sheet, approved by RINA with No.: SHFP-22512;
- Technical Drawing of Dual-purpose Type Nozzles, approved by RINA with No.: SHFP-22514;
- Main Technical Parameters of the Product, filed by RINA with No.: SHFP-22517;
- Instruction and Maintenance Handbook, filed by RINA with No.: SHFP-22515.
Tests Carried Out
Test Report of Dual-purpose Type Nozzles (Ref No.: 20230209-1) issued by Jiangsu Yean Environmental Protection Equipment Science and Technology Co., Ltd dated on 09/02/2023 in compliance with EN 15182-1:2019 and EN 15182-2:2019, and filed by RINA with No.: SHFP-22518.
Remark
The product is to be marked according to EN 15182-1:2019 Ch. 8.2 and in addition with the MED Mark of Conformity, Notified Body No. and the year of manufacturing.
Each branchpipe shall be delivered with an instruction and maintenance handbook, according to Ch. 8.1.2 & 8.1.3 of EN 15182-1:2019.