MED334025CSENGD- -  -  N- SOMEC FRP D 003 -N- S- S- -09/07/2025- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED334025CS- N-Jul 8, 2030162855
 
Form
  Marine Equipment(TO)
Certification N. MED334025CS - (ENG)
Certificate date 09/07/2025
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16

Model or Denomin.
Items
SOMEC FRP D 003
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email 0438471904, ---, dcalderola@somecgroup.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Request 30/06/2025
Expire date 08/07/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED334025CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.16
Description Fire doors
Type SOMEC FRP D 003
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Issued in Genoa on
This Certificate is valid until
July 9, 2025
July 8, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED334025CS
Page 1 of 3





Product description


Glazed single leaf hinged door having maximum dimensions of 1200x2300 mm (WxH) and maximum clear opening of 1055x2260 mm(WxH). The glass pane, having maximum clear opening size of 1030x2130 mm, is composed, moving from the side opposite to the hinges, of a glass type PYRAN S (manufacturer Schott AG - Germany) fitted with or without deposited metallic oxides and having thickness of 6 mm, a void space, 9 mm deep and a toughened pane having thickness of 8 mm, with or without deposited metallic oxides, manufactured by Soglass. The door frame and the glass frame are composed of hollow stainless steel profiles having thickness of 1.5 mm bolted by means of M10 screws to steel flats having dimensions of 60x6 mm (lower part) and to L shaped carbon steel profiles having dimensions of 60x40x6 mm (other sides). The glass retaining frame is composed of hollow stainless steel profiles having thickness of 1.5 mm screwed to the frame. Between the glass faces, the frame and the glass retaining frames, gaskets of KERAFIX FLEXLIT type, are fitted. Between the glass edges and the frame, on lower side, also spacers of calcium silicate having dimensions of 25x25x6 mm, are fitted. Between door frame and glass frame intumescing strips type SEALBIFIRE S BLACK, are fitted. The glass panes are sealed by means of silicone type PENSIL 300. The leaf is equipped, on the inside, with a closing bar, actuated by the handle, that acts on 3 points. The door may be fitted with door check.
The door having maximum dimensions of 764x1842 mm (WxH) and maximum clear opening of 722x1800 mm(WxH) may be produced as described above or with the following description.
The glass pane, having clear opening size of 594x1672 mm, is composed, moving from the exposed side, of a glass type PYRAN S (manufacturer Schott AG - Germany) fitted with or without deposited metallic oxides and having thickness of 6 mm, a void space, 9 mm deep and a toughened pane having thickness of 6 mm, with or without deposited metallic oxides, manufactured by Soglass. The door frame and the glass frame are composed of hollow stainless steel profiles having thickness of 1.5 mm bolted by means of M10 screws to steel flats having dimensions of 80x8 mm (lower part) and to L shaped carbon steel profiles having dimensions of 80x40x8 mm (other sides). The leaf is equipped with one closing point that acts on the spring latch.









 



ATTACHMENT TO
CERTIFICATE Nr. MED334025CS
Page 2 of 3



Field of application

Fire resistant A-0 single leaf hinged glazed door with fire hazard on the side fitted with the toughened pane having thickness of 6 mm. Fire resistant A-0 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
Reference documents

SOMEC drawings No. SDM-33 dated 16 April 2012 and No. SDM-45-01 dated 26 June 2015 approved on 29 June 2012 and 9 July 2015 respectively with endorsement No. LABS-685 and No. LABS-1098.

Tests carried out

Tests as per RINA Test Laboratory Reports No. 2012CS011777/1 dated 29 June 2012 issued according to IMO Res. A. 754(18) and to IMO MSC.1/Circ. 1319 dated 11 June 2009 and No. 2015CS012076/1 dated 9 July 2015 issued according to IMO 2010 FTP Code and to IMO MSC.1/Circ. 1319 dated 11 June 2009.




ATTACHMENT TO
CERTIFICATE No. MED334025CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****