DIP264024CSBIL- -  -  N- Vetrata 2247x647 mm con due oblò tondi filo vetro diam. 250 mm (cod. AM-FV-010) -N- S- S- -30/04/2025- Prodotti per nautica diporto- - SN- N- Stefano Moscatelli- N-  - 643,953Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP264024CS- N-Apr 29, 2030643953
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP264024CS - (BIL)
Certificate date 30/04/2025
Product Finestratura a scafo con oblò

Model or Denomin.
Items
Vetrata 2247x647 mm con due oblò tondi filo vetro diam. 250 mm (cod. AM-FV-010)
Applicant FERRETTI S.P.A.
Place of requester VIA ANSALDO, 5/7  %  47100 Forli' (FC)  % ITALY
Tel. N.,Fax, Email 0543/787511, 0543/473069, ---
Directive NONE
Standards RINA rules for the Classification of Yachts
Expire date 29/04/2030
Responsible Office VIAREGGIO
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP264024CS
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Finestratura a scafo con oblò
Description Hull window plus portlight
Tipo Vetrata 2247x647 mm con due oblò tondi filo vetro diam. 250 mm (cod. AM-FV-010)
Type
Richiedente
Applicant
FERRETTI S.P.A.,VIA ANSALDO, 5/7,47100 Forli' (FC),ITALY
Norme di riferimento RINA rules for the Classification of Yachts
Reference standards RINA rules for the Classification of Yachts








_________________________________
RINA Services S.p.A.
  
Giuseppe TianoStefano Moscatelli
       
Rilasciato a VIAREGGIO il 30  Aprile  2025.  Questo Certificato è valido fino al 29 Aprile 2030
   
Issued in VIAREGGIO  on April 30, 2025. This Certificate is valid until April 29, 2030
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
DIP264024CS
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
Vetrata 2247x647 mm con due oblò tondi filo vetro diam. 250 mm (cod. AM-FV-010)


Documenti di riferimento / Reference documents:
- Pratica n. RS/2018/CS/01/2335 & RS/2024/CS/01/2640.
- Job nr. RS/2018/CS/01/2335 & RS/2024/CS/01/2640.

Descrizione Prodotto / Product description:
- Vedere disegno approvato con n° DIP-92007.
- See drawing approved with nr. DIP-92007.

Condizioni di accettazione / Acceptance conditions:
1) La finestratura è idonea per installazione a bordo di unità aventi lunghezza fra le perpendicolari (corrispondente al galleggiamento di massimo carico) < 50 m per unità a motore e < 40 m per unità a vela.
1) The hull window is suitable for installation on board of yachts having length between perpendicular (corresponding to full load waterline) < 50 m for motor yachts and < 40 m for sailing yachts.

2) La finestratura di murata è idonea per installazione nelle seguenti zone (vedere la figura seguente): 1a, 1b, 2a e 2b.
2) The hull window is suitable for installation in the following zones (see the following figure): 1a, 1b, 2a and 2b.



3) Per unità in servizio commerciale, l'esenzione per l'uso della corazza in qualsiasi posizione deve essere sempre confermata dall'Autorità di Bandiera.
3) For yachts designed for commercial use, the exemption for the use of deadlight in any zone is to be always confirmed by the Flag Authority.

4) Deve essere verificato che le pressioni p1, p2 e p3, come calcolate mediante le formule regolamentari, siano inferiori a 77 kN/m^2.
4) It is to be verified that the pressures p1, p2 and p3, as calculated according to the rule's formulas, are less than 77 kN/m^2.

Nota: vetrata con oblò fabbricata da Amare s.r.l., Pozzilli (IS), Italia.
Note: windows with portlights manufactured by Amare s.r.l., Pozzilli (IS), Italy.


 Viareggio, 30 Aprile 2025 
  Viareggio, April 30th 2025
**** NOTICE: This is NOT an official certificate ****