MED487026CS!002ENGD- -  -  N- COFLEX KCF -N- S- S- -21/09/2026- Marine Equipment- - SN- S- Rosario Pitruzzo- N-  - 2,338,225Rosario PitruzzoB2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED487026CS/002- N-Nov 7, 20302338225
 
Form
  Marine Equipment(TO)
Certification N. MED487026CS/002 - (ENG)
Certificate date 21/09/2026
Type Protezione antincendio
Product Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Item Nº MED/3.15c

Model or Denomin.
Items
COFLEX KCF
Applicant COFI SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA FRATELLI ARPE 49  %  16038 Santa Margherita Ligure (GE)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2026/1434
Standards ISO 15540, ISO 15541
Reference Documents Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Request 30/10/2024
Expire date 07/11/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Carlo Valle S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED487026CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/3.15c
Description Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Type COFLEX KCF
Applicant COFI SOCIETA' A RESPONSABILITA' LIMITATA
VIA FRATELLI ARPE 49,16038 Santa Margherita Ligure (GE),ITALY
Testing standards ISO 15540, ISO 15541
Reference standards Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Issued in Genoa on
This Certificate is valid until
September 21, 2026
November 7, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED487026CS/002
Page 1 of 2
MATERIALS/COMPONENTS

Non-metallic expantion joints, type COFLEX K:

- Inner side:
nitrile rubber
- Reinforcement rings:
polyamide
- Fabric reinforcement:
polyamide
- Cover
neoprene or nitrile rubber
- Flanges:
Carbon steel or stainless steel or bronze
provided with a flame-proof guard (COFLEX CF) composed by :

- Inner layer: "2002 AL HT" aluminized glass fabric.
- Heat insulation layer: "SUPERWOOL 607" glass fiber for high temperature (1100 °C) having nominal thickness 1/2" and density 128 Kg/m
3
- Outer layer: "2002 AL HT" aluminized glass fabric.

A plate, showing the instruction according to technical specifications, will be fastened to the guard external surface.

REFERENCE DOCUMENTS

Technical drawings approved with document PPVT/52 letter PRMT/2026/907/CRLVA.
Technical specification COFI n° 110173 related to materials of rubber joints COFLEX K archived with document PPVT-41181.


Technical Specification and catalogue COFI n. 110066/8 and n. 0029/8 related to flame proof guard COFLEX CF.

TECHNICAL DATA

Length 152 mm - Diameter: DN 32; 40; 50; 65; 80; 100; 125; 150; 175; 200;
Length 200 mm - Diametri: DN 250; 300.
Working temperature: min -20°C, max +90°C.
Maximum working pressure:
DN 40; 50; 65; 80; 100; 125; 150; 200; 250; 300 - PN 6: 6 bar (0,6 MPa)
DN 32 ÷ 300 - PN 10: 10 bar (1,0 MPa)
DN 32 ÷ 300 - PN 16: 16 bar (1,6 MPa)


Length 130 mm - Diameter: DN 32; 40; 50; 65; 80; 100; 125; 150; 200; 250.
Working temperature: min -20°C, max +90°C.

Maximum working pressure:
DN 40 ÷ 250 - PN 6: 6 bar (0,6 MPa)
DN 32 ÷ 250 - PN 10: 10 bar (1,0 MPa)
DN 32 ÷ 250 - PN 16: 16 bar (1,6 MPa)
TEST CARRIED OUT
Fire resistance Test and Burst test archived with document PPVT-41107 Letter PPVT/2023/268/CRLVA.

This certificate annuls and replaces the certificate No. MED521025CS.





ATTACHMENT TO
CERTIFICATE No. MED487026CS/002
Pages 2 of 2



The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
**** NOTICE: This is NOT an official certificate ****