FAB214524PUENG- -  -  N- Steel forgings for machinery and solid crank shaft  -N- S- S- -02/01/2025- Fabbricanti Approvati- - SN- N- - S-  - 1,014,451BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB214524PU- N-Jan 20, 20301014451
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB214524PU - (ENG)
Certificate date 02/01/2025
Type Approvazione di fabbricanti di materiali
Product Fucinati in acciaio

Model or Denomin.
Items
Steel forgings for machinery and solid crank shaft
Applicant NIPPON STEEL CORPORATION KANSAI WORKS OSAKA AREA
Place of requester 1-109, Shimaya 5-chome, Konohana-ku, Osaka-city, 554-0024 Osaka, JAPAN
Tel. N.,Fax, Email +81 6 6466 6119, +81 6 6466 6217, kadota.9ag.satoshi@jp.nipponsteel.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 20/01/2030
Responsible Office RINA Korea Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB214524PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel forgings
Type Steel forgings for machinery and solid crank shaft
Applicant NIPPON STEEL CORPORATION KANSAI WORKS OSAKA AREA
1-109, Shimaya 5-chome, Konohana-ku, Osaka-city
554-0024 Osaka
JAPAN
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until January 20, 2030
_________________________________
RINA Services S.p.A.
Sung-Ki Yang
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB214524PU
Enclosure - Page 1 of 1
Steel forgings for machinery and solid crank shaft

APPROVAL CONDITIONS


Steel types: carbon, carbon-manganese, low alloy steels.

Manufacturing process of steel: billet

Forging process: closed die forging

Product max. weight: 1500 kg

Heat treatment: quenching and tempering, normalizing

Survey conditions: all forgings to be used for construction of ships and machinery classed with RINA shall meet the requirements of the RINA Rules and shall be tested accordingly.




Remark
The present Certificate annuls and replaces the previously issued Certificate no. FAB068220PU on 20/05/2020.


General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Korea Marine 
January 2, 2025
**** NOTICE: This is NOT an official certificate ****