DIP018126XT!002BILB- -  -  N- Watertight Aluminum Casting Alloy Flush Hatch,500 x 500 mm - 600 x 600 mm -N- S- S- -16/01/2026- Prodotti per nautica diporto- - NN- N- - N-  - 166,397BbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP018126XT/002- N-Jan 16, 2029166397
 
Form
  Prodotti per nautica diporto(TO)
DIP018126XT/002
Certification N. DIP018126XT/002 - (BIL)
Certificate date 16/01/2026
Product Boccaportelli stagni

Model or Denomin.
Items
Watertight Aluminum Casting Alloy Flush Hatch,500 x 500 mm - 600 x 600 mm
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
Place of requester AYDINLI BIRLIK OSB MAH., BATI CAD., No.28  %  34953 Tuzla  % TURKEY
Tel. N.,Fax, Email +90 216 466 4619, +90 216 466 4621, volkanbalci@bofor.com.tr
Directive NONE
Standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Expire date 16/01/2029
Head Office ISTANBUL
TYPE APPROVAL CERTIFICATE MATERIALI BIL
Vuoto Querysave
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATEN. DIP018126XT/002
This is to certifythat the product identified below is in compliance with the applicable requirements of the RINA type approval system.
This is to certifythat the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Boccaportelli stagni
Description Watertight hatches(Aluminium)
Tipo Watertight Aluminum Casting Alloy Flush Hatch
500 x 500 mm - 600 x 600 mm
Type
Norme di riferimento Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Reference standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts








_________________________________
RINA Services S.p.A.
  
Alper Tek
       
Rilasciato a ISTANBUL il 16  Gennaio  2026.  Questo Certificato è valido fino al 16 Gennaio 2029
   
Issued in ISTANBUL  on January 16, 2026. This Certificate is valid until January 16, 2029
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE
DIP018126XT/002
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
500 x 500 mm - 600 x 600 mm
Reference documents:
- Job nr. 2026/XT/01/181

Product Description:
- Watertight hatches: 500 x 500 mm; 600 x 600 mm
- See drawings approved with nr. from ISDP-22526.
- If the same construction materials, as per approved a.m. drawings, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 500 and 600 mm and long side between 500 and 600 mm.
- The hatches are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness".
- Hatches suitable for an hydraulic pressure of 3.0 m head.
- Hatches fitted on escape ways are to be operable by both sides (handles are to be permanently fixed).
- Hatches suitable for yachts designed for Commercial use having GT < 500 and fitted other than the engine room and galley boundaries.
- Hatches suitable for pleasure yachts having any GT and fitted other than the engine room and galley boundaries.
- Hatches suitable for pleasure yachts having GT<= 300.
Fields of application:
- Watertight hatches for "RINA Rules for the Classification of Yachts designed for Commercial Use" and "RINA Rules for the Classification of Pleasure Yachts".


 16.01.2026 
 
**** NOTICE: This is NOT an official certificate ****