ELE526625CSENG- -  -  N- MD1CE101 Diesel Engine Control Unit -N- S- S- -02/03/2026- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 2,378,979Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE526625CS- N-Mar 2, 20312378979
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE526625CS - (ENG)
Certificate date 02/03/2026
Type Impianti di Automazione
Product Unità controllo motore

Model or Denomin.
Items
MD1CE101 Diesel Engine Control Unit
Applicant FPT INDUSTRIAL S.P.A.
Place of requester VIA PUGLIA, 15  %  10156 Torino (TO)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3, Sec. 8, Table 1
Expire date 02/03/2031
Interrut.+Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE526625CS
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Diesel engine control unit
Type MD1CE101 Diesel Engine Control Unit
Applicant FPT INDUSTRIAL S.P.A.
VIA PUGLIA, 15
10156 Torino (TO)
ITALY
Reference standards Rules for the Classification of Ships - Part C - Machinery Systems and Fire Protection,Ch. 3, Sec. 8, Table 1
  

 
 
   .   This Certificate is valid until March 2, 2031
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE526625CS
Enclosure - Page 1 of 1
ESD 5500E  Series Speed Control Unit,180 Series  Engine Mounted Actuator

Description

The MD1CE101 (MD1) is an electronic diesel engine control unit designed to monitor engine parameters and control engine speed by managing injector actuation. It has been adopted by FPT Industrial and several other manufacturers demonstrating high reliability in field operations.

Physical Characteristics

Dimensions: 218 × 260 × 83 mm
Weight: 1.9 kg
Mounting: 8 × M6 screws, tightening torque 10 ± 2 Nm
Harness Support: Wiring harness must be supported mechanically within <150 mm from ECU mounting position


Electrical Characteristics

Nominal supply voltage: 24 V DC - Tested operating voltage range: 0–36 V (acceptance ±0.5 V)
Key input: +15 V (mandatory for ECU activation)
Voltage variation severity: +30% / –25% (battery‑charging system class)


Interfaces

The ECU provides a set of power, communication and signal interfaces, including a 24 Vdc supply input, a CAN 2.0B / SAE J1939 communication line for monitoring and speed control (TSC1), and several analog/digital channels typically used for engine-related sensors and actuators (e.g. boost pressure/temperature sensing, speed input, injector drive, and discrete ON/OFF status inputs). The cabling used during testing consisted of unshielded 8 m harness sections as specified in the test report.

Note:
All ports listed above represent the full set of available power and signal interfaces of the ECU. Only the ports connected during the tests (as per Teslab Report 25A293F §6.x) were actually stressed during EMC and environmental testing.


Technical description
FPT Bosch MD1 Notes for RINA Type Approval 251028

Test report
Teslab Test Report n°25A293F (18/112/2025)



Reference documents:
Offer 2025/34367 accepted on 20/11/2025
TAO APP dated 16/10/2025
https://leodrawplus.rina.org/projects/73024/detail

Genoa February 3, 2026
**** NOTICE: This is NOT an official certificate ****