SIMATIC S7-400 comprises:
| Processor modules |
| CPU 412-1, CPU 412-2, CPU 414-2, CPU 414-3, CPU 416-2, CPU 416-3, CPU 417-4 |
| Digital I/O modules | Analog I/O modules |
| SM421 | SM422 | SM431 | SM432 |
16 /32 ch. Input
24Vdc- 120 to 230Vac | 8 / 16 / 32 ch. Output
24Vdc– 20to120VAc- Relay | 8 / 16 channels Input
TC – RTD –V - I | 8 channels Output
V – I |
| Positioning Modules |
| FM451 | (4 DI per axis , 4 DO per axis)
Positioning of 3 indep. axes; 12 DI - 12DO (4 x axis) |
| FM453 | (6 DI per ch./axis 4 DO per ch./axis)
Positioning with 3 ch./axis - servo and/or stepper motor |
| Counter Modules: |
| FM450-1 | Dual -channel counter module for direct connection of incremental encoder |
| Cam Controller |
| FM452 | High–speed controller 16,32,64,128 cams available – 32 cam tracks, 16 on-board D.O |
| Closed-Loop control module |
| FM455 C - S | 16 channels with. TC or 2 wire connection , 8 channels. with PT100 or 4 wires connection
16 Analog output V-I (C type) or 32 Digital output (S type) |
TYPE APPROVAL CERTIFICATE
No. ELE007022XG/001
Enclosure - Page 2 of 3
Simatic S7-400
| Communication processors |
| CP440 | Point to point conn., RS 422/ RS 485 (X.27) ; 115.2 kbit/s max 1200 m
protocol ASCII, 3964 (R); Up to 32 Nodes |
| CP441-1 / 2 | 1 / 2 variable interfaces for simple point to point links; Interfaces submodule:
20 mA (TTY) 19.2 kbit/s, RS232C(V.24) 38.4 kbit/s, 115.2 kBit/s,
RS 422 /485(X.27) 38.4 kbit/s, 115.2 kbit/s |
| CP443 | Industrial Ethernet Std. IEEE 802.3 - using MMS services in accordance with MAP 3.0
Profinet IO 10/100(/1000) Mbit/s
Profibus DP 9.6 Kbit/s ... 12 Mbit/s |
| Interface module |
IM460
Use with IM461-0
IM 460-1 (1,5 m)
IM 460-3 (102 m) | Send interface module for central expansion up to 5 m ; Transmission of P and C bus
Can be plugged into central controller; Up to 8 expansion racks can be connected |
IM461
Use with IM460-0
IM 461-1 (1,5m)
IM 461-3 (102 m) | Receive interface for central expansion up to 5 m; Trasmission of P and C bus
Can be plugged into expansion unit |
| Power Supply modules |
| PS 405 | Input 24 , 48, 60 Vdc – Output 5Vdc 4,10,20A and 24Vdc 0.5, 1A |
| PS 407 | Input 120 /230Vac 110/230Vdc - Output 5Vdc 4,10, 20A and 24Vdc 0.5, 1A |
| Mounting Racks |
| UR1 universal rack | For configuring central controllers and expansion units; for up to 18 modules |
| UR2 universal rack | For configuring central controllers and expansion units; for up to 9 modules |
| UR2-H universal rack H | For configuring central controllers and expansion units; 2 segments for up to 9 modules each |
| CR2 central rack | For configuring central controller; for up to 18 modules |
| CR3 central rack | For configuring central controller; for up to 48 modules |
| ER1 expansion rack | For configuring of expansion units: for up to 18 modules with restricted functionality |
| ER2 expansion rack | For configuring of expansion units; for up to 9 modules with restricted functionality |
TYPE APPROVAL CERTIFICATE
No. ELE007022XG/001
Enclosure - Page 3 of 3
Simatic S7-400
| SUB Modules |
| IF 964 DP | For connection to PROFIBUS-DP 9.6 kBit/s to 13 MBit/s |
| IF 963 RS232C | For connection to RS232 interface |
| IF 963 20mA TTY | For connection to 20mA TTY interface |
| IF 963 X27 | For connection to X27 interface |
| MC 952 | Memory card |
Technical description:
Siemens Catalog n. ST 70 : Components for Totally Integrated Automation (2015)
Interactive Catalog CA 01, Edition: 10/2014 Products for Automation and Drives
General remarks:
- Equipment is to be installed and / or modified according to the test reports requirements.
- This product does require unit certification in connection with the equipment in which it is used (Computer based system Category II or III), but not at its plant of manufacture.
This certificate annuls and replaces the previous one N° ELE129215XG/001. |
|