FAB328023WSENGB- -  -  N- A/B/D/AH32/AH36/DH32/DH36 -N- S- S- -29/08/2023- Fabbricanti Approvati- - SN- N- - S-  - 1,062,003BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB328023WS- N-Sep 13, 20281062003
 
Form
  Fabbricanti Approvati(TO)
FAB328023WS
Certification N. FAB328023WS - (ENG)
Certificate date 29/08/2023
Type Approvazione di fabbricanti di materiali
Product Lamiere da scafo in acciaio ordinario e ad elevata resistenza

Model or Denomin.
Items
A/B/D/AH32/AH36/DH32/DH36
Applicant TIANJIN IRON AND STEEL GROUP CO., LTD
Place of requester NO. 398 JINTANGGONGLU, DONGLI DISTRICT Tianjin  % CHINA
Tel. N.,Fax, Email +86 22 24706052, +86 22 24706052, tgrz166@yeah.net
Standards RINA Rules for the approval of manufacturers of materials
Expire date 13/09/2028
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB328023WS
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Normal strength and higher strength hull steel plates
Type A/B/D/AH32/AH36/DH32/DH36
Applicant TIANJIN IRON AND STEEL GROUP CO., LTD
NO. 398 JINTANGGONGLU, DONGLI DISTRICT Tianjin
CHINA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until September 13, 2028
_________________________________
RINA Services S.p.A.
Hong Gu
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB328023WS
Enclosure - Page 1 of 1
A/B/D/AH32/AH36/DH32/DH36

APPROVAL CONDITIONS



Steel making : Basic Oxygen converter, Ladle furnace


Casting process: Continuous casting


Deoxidation practice, condition of supply and thickness:

Steel grades
Deoxidation practice and fine grained elements
Condition of supply and max. thickness
A,B
Killed, fine grained Al
t ≤ 38, AR
D
Killed, fine grained Al
t ≤ 38, CR
AH32,AH36,DH32,DH36 Killed, fine grained Al+Nb t ≤ 38, CR
AH32,AH36,DH32,DH36 Killed, fine grained Al+Nb 38< t ≤ 50, N

Remark: AR- As Rolled CR- Control Rolled N- Normalizing

Survey conditions:
The plates are to be in compliance in all respects with the relevant RINA rules and are to be tested accordingly.



General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine August 29, 2023
**** NOTICE: This is NOT an official certificate ****