MED200625PUENG- -  -  N-  HLB-NM67FC / HLB-NM67FF -N- S- S- -15/12/2025- Marine Equipment- - NN- S- - N-  - 201,222B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED200625PU- N-Dec 15, 2030201222
 
Form
  Marine Equipment(TO)
Certification N. MED200625PU - (ENG)
Certificate date 15/12/2025
Type Mezzi di salvataggio
Product Lifeboats: (b) free-fall lifeboats
Item Nº MED/1.17b

Model or Denomin.
Items
HLB-NM67FC / HLB-NM67FF
Applicant HLBENG CO., LTD.
Place of requester 216-53 Dangwol-ro, Onsan-eup, Ulju-gun,  %  45011 Ulsan  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 52 256 9442, ---, mong11@hlb-eng.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102), IMO MSC/Circ.1006.
Reference Documents SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630 Rev 2.
Expire date 15/12/2030
Head Office BUSAN
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Jin Young Kim S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED200625PU

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.17b
Description Lifeboats: (b) free-fall lifeboats
Type HLB-NM67FC / HLB-NM67FF
Applicant HLBENG CO., LTD.
216-53 Dangwol-ro, Onsan-eup, Ulju-gun,,45011 Ulsan,REPUBLIC OF KOREA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102), IMO MSC/Circ.1006.
Reference standards SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630 Rev 2.
Issued in BUSAN on
This Certificate is valid until
December 16, 2025
December 15, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Jin Young Kim
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED200625PU
Page 1 of 3


Product Description

  • HLB-NM67FC : Totally enclosed free-fall lifeboat
  • HLB-NM67FF : Totally enclosed free-fall lifeboat, Equipped with self-contained air support system and water spray system


Length x Breadth x Depth
6.70 m x 2.75 m x 0.90 m
Hull material (G.R.P) Resin
TM-107M (Manufacturer: Changzhou Huari New Material Co., Ltd.)
Mat
EMC300, EMC450 (Manufacturer: Changzhou Tiama Group Co., Ltd.)
Roving
EWR600 (Manufacturer: Changzhou Tiama Group Co., Ltd.)
Type of release mechanism(s)
RH50F (SWL: 50 kN)
(Manufacturer: Ningbo New Marine Lifesaving Equipment Co., Ltd.)
Propulsion type
Inboard marine diesel engine
Minimum speed
≥ 6 Knots
Type of boat
HLB-NM67FC
HLB-NM67FF
Light load (fully equipped)
3,676 kg
3,968 kg
Carrying capacity (Person)
31 P
30 P
Full load (82.5 kg/Person)
6,234 kg
6,443 kg
Bollard pull force
2,800 N (Max) / Engine model: 380J-3
(Manufacturer: Zhenjian Siyang Diesel Engine Manufacturing Co.Ltd)
Free-fall height (Max.)
21 m
Launching ramp length (Min.)
8.0 m
Launching ramp angle
30°
Launching condition
Trim ≤ 10°, List ≤ 20°



ATTACHMENT TO
CERTIFICATE No. MED200625PU
Page 2 of 3
Technical Documentation
  • Technical drawings and Manual, filed by RINA listed on Letter No. PUFP/2025/477/YK008
Tests Carried Out
  • Test report of Fire-retardant & Flame-resistant test materials (Ref. No. 2023-03-M001), issued by Shanghai R&D Center for Polymer material dated on 21-04-2023, filed by RINA with No. PUFP-8016.
  • Test report of Fire test (Ref. No. S150-XHS-01-2007), issued by The Marine Environment Engineering and Reliability Laboratory of NO.704 Research Institute of CSIC dated on 12-07-2007, witnessed by BV and filed by RINA with No. PUFP-8017.
  • Test report of Free-fall test (Ref. No. S495-XPL(1)-2018 & S495-XPL(2)-2018), issued by The Marine Environment Engineering and Reliability Laboratory of NO.704 Research Institute of CSIC dated on 30-09-2018, filed by RINA with No. PUFP-8018.
  • Type Examination Test Report (Ref No. NM67-02 & NM67-2021-01), witnessed by CCS dated on 30-09-2018 & 18-03-2021, filed by RINA with No. PUFP-8019.
  • Application/Limitation

    • Life/Rescue boat equipment and marking/instructions are to be inspected after installation onboard the ship.
    • Production and installation testing shall be carried out according to IMO Res.MSC.81(70), part 2 as amended.
    • The launching appliance that satisfying the free-fall characteristics should be used for this product.
    • Instructions for installation, use and maintenance are to be available in the ship’s official language.
    • Listed in Marine Equipment Directive such as Engine, Release mechanism and all the equipment supplied with this boat shall be certified according to the provisions of current revision of Marine Equipment Directive.
    • Product shall be permanently marked with as follows in accordance with the LSA Code, item 4.4.1.2.

    Notes
    • None.








    ATTACHMENT TO
    CERTIFICATE No. MED200625PU
    Pages 3 of 3
    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
    XXXX/YY
    "WHEELMARK FORMAT"

    XXXX
    Notified Body number undertaking surveillance module
    YY
    Last two digits of year mark affixed
         
    ______________________________________________
    General conditions for the approval
    a) The initial conditions verified by RINA at the time of the approval are to be maintained
    b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
    c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
    d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
    e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

    f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


    __________________________________________
    Jin Young Kim
    **** NOTICE: This is NOT an official certificate ****