|
RCD II - D6 - (Modulo F) |
|
BIL |
|
Vuoto |
|
Querysave |
|
|
 |
CERTIFICATO DI CONFORMITA'
CERTIFICATE OF CONFORMITYN. DIP006119WT/001
|
Si certifica, in qualità di organismo notificato (n° 0474) che la seguente unità da diporto è stata verificata in accordo ai requisiti previsti dalla Direttiva 2013/53/UE ed è risultata conforme al tipo descritto nel certificato di esame UE del tipo e a detti requsiti.
We certify, as notified body (no. 0474), that the following recreational craft has been examined in accordance with the prescriptions of Directive 2013/53/EU and has been found in compliance with the type described in the EU type examination certificate and with said requirements.
|
| Descrizione |
UNITA' DA DIPORTO |
| Description |
RECREATIONAL CRAFT |
| Denominazione |
BELIZE 54 |
| Identification |
|
| C.I.N. |
TW-KSE54029L920 |
| Norme di riferimento |
Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione. |
| Reference standards |
European Directive 2013/53/EU - Rules for EC certification of recreational craft and their components, personal watercraft, noise emissions from recreational craft and exhaust emissions from propulsion engines. |
|
|
|
|
| Documenti di riferimento |
Certificato di esame UE del tipo n°DIP003817WTRilasciato il02/08/2018 |
| Reference documents |
EU type examination certificate no.DIP003817WTIssued on02/08/2018Rapporto delle verifiche effettuate n°2019/WT/01/61Report of tests carried out no.2019/WT/01/61 |
|
|
|
In base agli Articoli 16, 17 e 18 della Direttiva 2013/53/UE, il presente certificato (Modulo F) consente al Fabbricante di apporre sul prodotto sopradescritto la seguente marcatura.
|
On the basis of Articles 16, 17 and 18 of Directive 2013/53/EU, this certificate (Module F) allows the Manufacturer to affix the following marking to the product described above.
|
|
0474
|
|
|
_________________________________
RINA Services S.p.A.
|
| |
Alberto Carmagnani
|
| Rilasciato a Genova il 9 Gennaio 2020 |
| .
|
| Issued in Genova on January 9, 2020 |
| |
|
|
|
|
|
|
|
|
Termini e condizioni di validità/Terms and validity
conditions
- Il presente certificato potrà perdere validità nel
caso siano apportate modifiche al prodotto rispetto
alla documentazione tecnica esaminata.
- The following condition may render this
certificate invalid: any technical modification to
the product as regards examined technical
documentation
|
Termini e condizioni di validità
La responsabilità del prodotto rimane del
fabbricante, del suo rappresentante o, in assenza di
un rappresentante, dell'importatore, in accordo con
la Direttiva 2001/95/EC relativa alla Sicurezza
Generale dei Prodotti. Le seguenti condizioni
possono rendere non valido il presente <Computed
Value>: modifiche nella realizzazione del
prodotto, rispetto alla documentazione tecnica
esaminata modifiche o emendamenti alla Direttiva
modifiche o emendamenti negli standard che
costituiscono la base per la conformità documentale
con i requisiti essenziali della Direttiva.
|
Terms and validity conditions
The product liability rests with the manufacturer, his
representative or, in the absence of a representative,
the importer, in accordance with the General Product
Safety Directive 2001/95/EC The following conditions may
render this <Computed Value> invalid: Changes in
construction of the product as regards the examined
technical file Changes or amendaments to the Directive
Changes or amendaments in the standards with form basis
for documenting compliance with the essential
requirements of the Directive. |
|
**** NOTICE: This is NOT an official certificate **** |
|
|