MED575807CSENGBS
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: B
Certification N. MED575807CS
Certificate date 12/20/07
Type Protezione antincendio
Product Superfici esposte e rivestimenti di pavimenti con limitata attitudine alla propagazione della fiamma - Sistemi di pitturazione
Item Nº A.1/3.18b
Model or Denomin. P.2 EPOSSIPOLIESTERE
Manufacturer POOLVER SAN GIORGIO SRL
Tel. N.,Fax, Email 0445 380800, 0445 364520, ---
Place of production VIA DELLA MECCANICA 8  %  36018 THIENE (VI)  % ITALY
Tel. N.,Fax, Email 0445 380800, 0445 364520, ---
Applicant POOLVER SAN GIORGIO SRL
Place of requester VIA DELLA MECCANICA 8  %  36018 THIENE (VI)  % ITALY
Tel. N.,Fax, Email 0445 380800, 0445 364520, ---
Directive 2002/75/EC
Dati Certificato F
Certification N. MED071308VE/002
Certificate date 28/03/2008
Mod. B Notified Body RINA (No. 0474)
Surveyor Paolo Chiappini
Lot Composition Kg 624
Lot ID or S.N. 28060

NOTE  The product should be applied to a metallic support having a thickness ≥ 0,75 mm. Film thickness range should be 60÷90 μm.

Regulation and Standards IMO Res. A.653(16), IMO Res. MSC.61(67) Annex 1, Part 5 and Annex 2. IMO MSC/Circ. 916 amended by IMO MSC/Circ. 1008, IMO MSC/Circ. 1004,Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment

RINA
Società per azioni
Via Corsica, 12 - 16128 Genova
Tel +39 010 53851
Fax +39 010 5351000

PRODUCT VERIFICATION (MODULE F)
CERTIFICATE Nr.  MED071308VE/002

This is to certify
that the Surveyor mentioned hereinafter did at the Manufacturer's request examine the construction and witness the testing of the equipment (lot of products) to ascertain its(their) conformity with the type(s) described in the EC Type Examination Certificate(s) corresponding to the MODULE B of the Council Directive 96-98 and subsequent Amendments.
Surveyor Paolo Chiappini
MED Item Nº A.1/3.18b
Description Surface materials and floor coverings with low flame-spread characteristics - Paint systems
Type P.2 EPOSSIPOLIESTERE
Applicant POOLVER SAN GIORGIO SRL
VIA DELLA MECCANICA 8,36018 THIENE (VI),ITALY

Module B certificate Number  MED575807CS
Date  Dec 20, 2007 
Date   RINA (No. 0474)
    
Issued at Venice 
On March 28, 2008

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in the Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /08
 

________________________________________
RINA - Lino Ballarin
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED071308VE/002
Equipment:
P.2 EPOSSIPOLIESTERE
Manufacturer
POOLVER SAN GIORGIO SRL

Place of Manufacturer
VIA DELLA MECCANICA 8
36018 THIENE (VI)
ITALY
Lot Composition
Kg 624
________________________________________________________________________________________________
Lot Identification or Serial Number
28060 NOTE The product should be applied to a metallic support having a thickness ≥ 0,75 mm. Film thickness range should be 60÷90 μm.
________________________________________________________________________________________________
Regulation and standards
IMO Res. A.653(16), IMO Res. MSC.61(67) Annex 1, Part 5 and Annex 2. IMO MSC/Circ. 916 amended by IMO MSC/Circ. 1008, IMO MSC/Circ. 1004,Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
________________________________________________________________________________________________


___________________________________
RINA - Lino Ballarin
RINA
Società per azioni
Via Corsica, 12 - 16128 Genova
Tel +39 010 53851
Fax +39 010 5351000
**** NOTICE: This is NOT an official certificate ****