MED369126CS!001ENGD- -  -  N- PORTA K5640D - 40 dB -N- S- S- -15/06/2026- Marine Equipment- - SN- S- - N-  - 613,375B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED369126CS/001- N-Jun 14, 2031613375
 
Form
  Marine Equipment(TO)
Certification N. MED369126CS/001 - (ENG)
Certificate date 15/06/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
PORTA K5640D - 40 dB
Applicant DE WAVE S.R.L.
Place of requester VIA DE MARINI 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010-64020886; davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ. 1511/Rev.1
Request 03/06/2026
Expire date 14/06/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED369126CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type PORTA K5640D - 40 dB
Applicant DE WAVE S.R.L.
VIA DE MARINI 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg. II-2/9; IMO MSC.1/Circ. 1511/Rev.1
Issued in Genoa on
This Certificate is valid until
June 15, 2026
June 14, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED369126CS/001
Page 1 of 2

Product description

Single leaf hinged door with maximum clear opening of 1000x2100 mm (WxH). The leaf, having maximum dimensions of 1028x2109 mm (WxH), is composed of two steel sheets having, each, thickness of 0.8 mm assembled by means of rivets having diameter of 4 mm and, in between, the insulating materials. These materials, starting from the opposite side of the hinges, are composed of a layer of mineral wool (certified non combustible in conformity to the requirements of the IMO FTP Code) having thickness of 20 mm and density of 150 kg/m3 and a layer having thickness of 20 mm and density of 180 kg/m3. The layers of insulation are glued to the steel sheets by means of 150 g/m2 of glue type PROTOPUR AE100 or type SIKAFORCE7110 L55 or DUNAPOL AD4020. The perimeter of the leaf is fitted with C shaped stainless or carbon steel profiles 0.8 mm thick and, on the hinges side, with a C shaped steel profile having thickness of 1.5 mm. The door frame is composed of a hollow carbon steel or stainless steel profile having thickness of 1.2 mm and it is fitted with a C shaped steel profile 0.8 mm thick; the horizontal element of the frame is insulated with mineral wool having density of 150 kg/m3. The sill is composed of a C shaped steel profile 1.2 mm thick fitted with a sill cover made of a C shaped stainless steel profile 2 mm thick. The frame is fixed to the bulkhead by means of screws type AF 4.2x50 mm, five on each side. The door may also be equipped with a peephole and a drop down sill. The door is fitted with three stainless steel hinges and a closure system actuated by an handle.
The door may be manufatured also by Metaldesi Srl - Via Ermanno Casoli 4 - 60044 Fabriano (AN) - Italy.
Field of application
Fire resistant B-15 Class single leaf hinged door with fire hazard on both sides. The door fitted with carbon steel frame and without drop down sill is also in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- doors without windows.
- maximum door size tested
- door used with a fire tested frame design
Reference documents
PRECETTI drawing No. PR115 Rev. 04 dated 31 January 2018 approved on 15 February 2018 with endorsement No. LABS-1610.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2016CS01261/1 dated 13 June 2016 and Istituto Giordano Test report No. 346871 dated 21 November 2017 issued according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED369126CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****