MED851925WSENGF- -  -  N- NH35Z -N- S- S- -17/05/2026- Marine Equipment- - SN- S- - N-  - 1,036,901B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED851925WS- N-May 18, 20311036901
 
Form
  Marine Equipment(TO)
MED645626WS/007
Certification N. MED851925WS - (ENG)
Certificate date 17/05/2026
Type Mezzi di salvataggio
Product Winches for survival craft and rescue boats: (e) fast rescue boats
Item Nº MED/1.41e

Model or Denomin.
Items
NH35Z
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
Place of requester No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City Taizhou (Zhejiang)  % CHINA
Tel. N.,Fax, Email 0576-8905 3360, 0576-8905 3363, nsy888@norsier.com
Directive (EU) 2025/1533
Standards IMO Res. MSC 81(70) as amended
Reference Documents SOLAS '74 Convention, as amended - Regulations III/16, III/17, III/23, III/24, III/34 (as applicable) IMO Resolution MSC.48(66) - LSA Code, as amended.
Expire date 18/05/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED851925WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.41e
Description Winches for survival craft and rescue boats: (e) fast rescue boats
Type NH35Z
Applicant ZHEJIANG NORSIER LIFESAVING EQUIPMENT TECHNOLOGY CO., LTD.
No. 9, Baijin Road, Sanjia Street, Taizhou Bay New District, Taizhou City Taizhou (Zhejiang),CHINA
Testing standards IMO Res. MSC 81(70) as amended
Reference standards SOLAS '74 Convention, as amended - Regulations III/16, III/17, III/23, III/24, III/34 (as applicable) IMO Resolution MSC.48(66) - LSA Code, as amended.
Issued in SHANGHAI on
This Certificate is valid until
May 18, 2026
May 18, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED851925WS
Page 1 of 2

TECHNICAL DATA


Product Description:
- Winch type NH35Z is suitable to be used in combination with davit for fast rescue boats.
- Maximum Working Load: 35 kN
- Maximum Hoisting Load: 35 kN
- Minimum Working Load: 10 kN
- Winch shall be positioned on board in order that if H is the height (m) from the davit head to the waterline (ship at lightest sea-going condition), the lowering speed (with MWL) to the water shall be not less than (0.4+0.02H) or 1 m/s, whichever is less.
- Winch NH35Z is equipped with hydraulic motor with type H1B080.
- Winch shall be installed with davit that are in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawing SHST-60905 and relevant test report.

REFERENCE DOCUMENTS

Appr. Dwg. no. Title
SHST-60905 NH35Z Drawings and Documents
TESTS CARRIED OUT
Tests have been carried out on 03/April/2026.




ATTACHMENT TO
CERTIFICATE No. MED851925WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****