ENGGN27/11/2025
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED787825WS
Certificate date 11/27/25
Type Prevenzione dell'inquinamento marino
Directive (EU) 2025/1533
Product Sistemi di trattamento dei gas di scarico a bordo
Item Nº MED/2.10
Model MPUSOx/U-3000
Identification S/N.OSU25305-001-8124,EGCS(SOx)  for Main engine + Auxiliary engine (3 Sets), Ship name: VELOS STAR  (IMO 9728124, RI 105557)
Applicant CHINA ZHEJIANG ENERGY MARINE ENVIRONMENTAL TECHNOLOGY CO., LTD.
Place of requester 6F, Building 5, Hipark 6, No. 666 Jianshe Er  Road, Xiaoshan District Hangzhou (Zhejiang)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Standards IMO Res. MEPC.340(77)
Surveyor Yingrong ZHAO
Responsible Office RINA China Marine



UNIT VERIFICATION CONFORMITY (MODULE G)
CERTIFICATE No.  MED787825WS

This is to certify
that RINA Services S.p.A. did undertake the relevant conformity assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Marine-Pollution prevention requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2025/1533.
MED Item Nº MED/2.10
Description On board exhaust gas cleaning systems
Type MPUSOx/U-3000
Identification S/N.OSU25305-001-8124,EGCS(SOx)  for Main engine + Auxiliary engine (3 Sets), Ship name: VELOS STAR  (IMO 9728124, RI 105557)
Applicant CHINA ZHEJIANG ENERGY MARINE ENVIRONMENTAL TECHNOLOGY CO., LTD.
6F, Building 5, Hipark 6, No. 666 Jianshe Er Road, Xiaoshan District Hangzhou (Zhejiang)
CHINA
Testing standards IMO Res. MEPC.340(77)
    
Issued in RINA China Marine 
on November 27, 2025

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community to affix the following symbol on the equipment above identified.
0474 /25
 

________________________________________
RINA Services S.p.A. - Yongjun Pan
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE No. MED787825WS
Place of unit verification
ON BOARD OF VELOS STAR (IMO 9728124, RI 105557),,

Verified components of the equipment (with serial number)
S/N.OSU25305-001-8124,EGCS(SOx)  for Main engine + Auxiliary engine (3 Sets), Ship name: VELOS STAR  (IMO 9728124, RI 105557)
Technical documentation
1, Following statutory document have been approved/filed in compliance with IMO Res. MEPC.176(58) - (Revised MARPOL Annex VI, Reg.4) and IMO Res. MEPC.340(77):
1.1 Technical Specification,     
1.2 Onboard Monitoring Manual (OMM),
1.3 Technical Manual, Scheme B (ETM-B),  
1.4 SOx Emission Compliance Plan, Scheme B (SECP),  
1.5 EGC Record Book,  
1.6 Electrical Drawing,  
1.7 General arrangement of Scrubber,  
1.8 P&ID,  
1.9 P&ID_Binder,  
1.10 MARPOL approval test Scheme B,  
1.11 PH Discharge,  
2. Product description:
The EGC unit from ZEME, often referred to as a scrubber, is based on the wet scrubbing technology. This particular system uses the surrounding seawater as wash water, which is discharged once through, that it is described as an open system.
The entire monitoring system is designed according to MARPOL Annex VI, NOx technical code 2008 chapter 5 and its Appendix III and according to section 6 of the Guidelines. A continuous stream of exhaust gas is extracted from the funnel after the EGC unit. The sample probe draws in the sample stream which is led to the conditioning cabinet via a heated sample line, where it is filtered and dehumidified before it is sent to the gas analyzer. The analyzer measures the SO2 and CO2 from where the Emission Ratio (ER) can be calculated. The measurements are logged every 90 seconds (the required interval is every 4.75 minutes)

3. Completed Tests on board were carried out from 21/11/2025 to 21/11/2025 during sea trial in accordance with IMO Res. MEPC.340(77) & approved documents, and relevant testing reports/ records are listed as below:
1. Commissioning test report.
2. Bunker Delivery Notes and laboratory analysis report.
3. RINA type approval certificate for Emission Monitoring system (By ABS)
4. RINA certificate for scrubber control panel.
5. Calibration protocols/certificates of CEMS and water monitoring sensors.
6. Span gas analysis certificate.
7. RINA Certificate for Electric Motors and Feed pumps.
8. Wash water sample nitrate analyses report from laboratory, and Certification for laboratory.

Limitation on the acceptance or use of the product
Max. Exhaust Mass Flow Rate is 80370 kg/h.
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Yongjun Pan
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****