ELE280822XGENGB- -  -  N- M1 series -N- S- S- -16/01/2023- Prodotti Elettrici- - SN- N- Giuseppe Russo- N-  - 1,049,407Giuseppe RussoBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE280822XG- N-Jan 15, 20281049407
 
Form
  Prodotti Elettrici(TO)
ELE280822XG
Certification N. ELE280822XG - (ENG)
Certificate date 16/01/2023
Type Impianti di Automazione
Product Controllore a logica programmabile

Model or Denomin.
Items
M1 series
Applicant Bachmann electronic GmbH
Place of requester Kreuzäckerweg 33  %  6800 Feldkirch  % AUSTRIA
Tel. N.,Fax, Email ---, ---, lothar.lins@bachmann.info
Standards Rules for the classification of ships.- Part C - Machinery, systems and fire protection. - Ch.3, Sect. 6, Table 1.
Expire date 15/01/2028
Head Office HAMBURG
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE280822XG
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Programmable logic controller
Type M1 series

Applicant Bachmann electronic GmbH
Kreuzäckerweg 33
6800 Feldkirch
AUSTRIA
Reference standards Rules for the classification of ships.- Part C - Machinery, systems and fire protection. - Ch.3, Sect. 6, Table 1.
  

 
 
   .   This Certificate is valid until January 15, 2028
_________________________________
RINA Services S.p.A.
Giuseppe Russo
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE280822XG
Enclosure - Page 1 of 2
M1 series
Product description:
The M1 series is a modular PLC system for normal and extreme environmental conditions.

Type
Description
M1 modules
AI2xx/xx*Analog input module
AIC212*/ AIC214* /AIC206*Condition monitoring module
AIO2xx/xx*Analog I/O module
AIO2xx/SI*Analog I/O module
AO2xx/xx*Analog output module
BS2xx/xx*Backplane with different slot(s), BS2xx/E, BS2xx/S, BS2xx/ET
CF200/xxxx*Compact flash card
CFA200/x*CFast Card
CM202*CAN-Bus module (Master)
CNT204/x*Counter module
DA3284-CDigital Analog Input/Output
DI2xx/xxx*Digital input module
DIO2xx/x*Digital input/output module
DIOxxx-CDigital Analog Input/Output
DO2xx/xx*Digital output module
DOR206/xxx*Digital output relay module
DPM200Profibus module
EM2xx*Ethernet master module
FM2xx*Fastbus master module
FS2xx/x*Fastbus slave module
GIO212*General I/O module
GM260*Grid measurement module
GMP232/x*Grid measurement protection module
GMP232/x2*Grid measurement module
GSP274*Grid measurement, synchronization and protection module
ISI2xx/x*Encoder interface module
LM201, S2xx*Dummy module
MC205*CPU module
MC206*CPU module
MC210*CPU module
MC212*CPU module
MC220*CPU module
MH230*CPU module
MX2xx/x*CPU module
NT2xx*Power supply 24/48VDC
PTAI216*Temperature recording module
TI214/x*Temperature recording module
PVA202*/PVA208*Proportional valve amplifier
RS204/x*Interface module RS232, 422, 485, TTY

* all cc Modules included






TYPE APPROVAL CERTIFICATE
No. ELE280822XG
Enclosure - Page 2 of 2
M1 series

Type
Description
Safety modules
SAI205**Safety analog Input module
SDI208 (cc)**Safety digital input module
SDO204 (cc)**Safety digital output module
SLC284 (cc)**Safety logic controller
SCT202 (cc)**Safety counter module

** only cc Modules in certification




Main characteristics:
Power supply: 24VDC nominal voltage
Ambient temperature: up to -40°C ...70°C (depending of the module type)
Degree of protection: IP20
Firmware version: M-Base V4.xx

Documents:
- Catalogue KA-System/EN, 11/2018

Test reports:
Bachmann: - 12718.00.03/04; 12718.00.05/06/11; 12718.00.10; 12718.00.13/14/17/18; 12718.00.19; 12718.00.20;
- 12718.00.21 Rev. 001; 12718.00.22; 12718.00.23; 13228-000-10; 13228-000-19,20; 13228-000-21; 13228-000-22;
- 13228-000-3,4; 13228-000-5,6,11; 13228-000-9; 13228-002-13,14,15,16,17,18; No13 - 18,EMC,Interference,Test,Report, Marine012,REV000; No19,20,EMC,Emission,Test,Report,Marine012,REV000; No3,4,Power,Supply,Failure, and,Variation,Test,Report,Marine012,REV000; No5,6,11,Dry,Heat,Damp,Heat,Cold,Test,Report,Marine012,REV000; No9,10,Insulation,Resistance,and,High,Voltage,Test,Report,Marine012,REV000; - 1R_M1_System_und_ Runtime_SW_REV000; 2R_Test_Configuration_Marine006_REV002;
TÜV SÜD Product Service GmbH: - 14312-52016-01 Ed. 1 dated 13 November 2014; 713051191 dated 2014-11-25;
- 713077298 Rev. 1 dated 2016-02-16; 713079418 dated 2016-04-06; 71392594A Rev. 1 dated 2011-10-14;
- 71392594b dated 2011-09-15; No14,EMC,Interference,TR-713278061-00,Marine012,REV000; No14,EMC,Interference,TR-14312-24452-01 Ed.2,Marine012,REV000; No7,Vibration,TR,713252021-00,Marine012,REV001;
Treo: - No22,Compass,Safe,Distance,433-22,V1U,Test,Report,Marine012,REV000;


Remarks:
- The equipment fulfils the EC-Code: 3a3.
- The EMC requirements for installation on the Bridge and Deck Zones will be fulfilled by the equipment, if the filter acc. to the M-Base V4.xx Operating manual will be used in power supply line.
- The GMP232/x2* module is not to be installed in the bridge and deck zone.
- Drawings of each system configuration is to be sent for approval before installation on board.
- In case of major software modification detailed information and suitable documents are to be submitted to the Society.

HAMBURG January 16, 2023
**** NOTICE: This is NOT an official certificate ****