1. Product Description
+ Shipboard bus cable:
| PROFIBUS | CANBUS | RS 485 | PROFNET |
Conductor | Stranded or solid; bare copper wire | Stranded bare copper | Stranded or solid, tinned or bare annealed, copper wire | Stranded tinned (or bare annealed) copper wire |
Insulation | Foamed Polyethylene | Cellular polyolefin | PE | Polyethylene |
Fire resistant tape (optional) | Mica tape |
Shield | Al-polyester tape + tinned copper wire braid |
|
| Al-polyester tape + tinned copper wire braid |
Individual Shield | - | Al-polyester tape | - |
Over all Shield | - | Tinned copper wire braid | - |
Inner sheath (optional) | SHF1 or SHF2 or SHF2 MUD |
Armour (optional) | Tinned copper wire or galvanized steel wire braid |
Grounding Wire (optional) | - | Stranded bare copperType | - |
Outer sheath (optional) | SHF1 or SHF2 or SHF2 MUD |
Cross-section aera | 0.34mm2
(22 AWG) | 0.75mm2
(18 AWG) | 0.22 - 0.75 mm2
(24-18 AWG) | 0.34mm2
(22 AWG) |
Number of pairs | 1 | 1-8 | 1-8 | 2 Pairs |
Note: +Install at: -15℃ to 50℃ +Operate at: -40℃ to 90℃
+ Properties’ suffix:
SHF1: Low Smoke, Zero Halogen, Flame retardant
SHF2 : Low Smoke , Zero Halogen, Flame retardant, Oil resistance
SHF2-MUD : Low Smoke , Zero Halogen, Flame retardant, Mud resistance
2. Test standards:
+ IEC 61158-2-2014; IEC 60092-360-2021; IEC 60331-23-1999; IEC 60332-3-22-2018;IEC 60332-1-2-2015;
IEC60754-1-2019; IEC60754-2-2019;IEC61034-2-2019;IEC 60684-2-2011;NEK TS 606.
3. Reference Documents:
+ Specification of marine cables. Filed by RINA with drawing No. SHEL-16852.
+ Manufacturer instruction. Filed by RINA with drawing No.: SHEL-16848.
+ Test Report: "China National cenre for Quality supervision and test of electrical wire and cable“ Report No.: CT17-04589, CT23-01391-1Y1 ~ 3Y1, CT17-07471, CT17-07469 and CT23-00044. Filed by RINA with drawing No.SHEL-16845.
+ Routine test Report signed by RINA Surveyor. Filed by RINA with drawing No.SHEL-17564.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-16849.
4. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment |
|