MED079022CSENGD- -  -  N- MODULO ARTIC -N- S- S- -13/03/2022- Marine Equipment- - SN- S- - N-  - 532,646B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED079022CS- N-Mar 12, 2027532646
 
Form
  Marine Equipment(TO)
Certification N. MED079022CS - (ENG)
Certificate date 13/03/2022
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
MODULO ARTIC
Applicant VELERIA SAN GIORGIO S.R.L.
Place of requester VIA ALCIDE DE GASPERI 37 H  %  16030 Casarza Ligure (GE)  % ITALY
Tel. N.,Fax, Email 0185 467701, 0185 467050, info@veleriasangiorgio.com
Directive (EU) 2021/1158
Standards IMO Res. MSC 81(70) as amended
Reference Documents Reg. III/7, Reg III/22, Reg.III/34 of SOLAS 74 as amended, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res MSC.48(66)-(LSA Code) I,II, IMO Res.MSC.97(73)-(2000 HSC Code) 8. IMO MSC.1/Circ.1470.
Request 03/02/2022
Expire date 12/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Giovanni Carratino S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED079022CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/1.4
Description Life jackets
Type MODULO ARTIC
Applicant VELERIA SAN GIORGIO S.R.L.
VIA ALCIDE DE GASPERI 37 H,16030 Casarza Ligure (GE),ITALY
Testing standards IMO Res. MSC 81(70) as amended
Reference standards Reg. III/7, Reg III/22, Reg.III/34 of SOLAS 74 as amended, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res MSC.48(66)-(LSA Code) I,II, IMO Res.MSC.97(73)-(2000 HSC Code) 8. IMO MSC.1/Circ.1470.
Issued in Genoa on
This Certificate is valid until
March 13, 2022
March 12, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED079022CS
Page 1 of 3

Main characteristic

Inflatable lifejackets for adult, type MODULO ARTIC , with the following characteristics and main components:
CodeType of activation
External compartmentInternal compartment
02150 Automatic / Manual / by mouth Automatic / Manual / by mouth
02151 Automatic / Manual / by mouth Manual / by mouth
02152 Automatic / Manual / by mouth By mouth

Models 02150/HX, 02151/HX and 02152/HX are equipped with safety harness device, with AISI 316 double fasteners, tested in compliance with ISO12401.

ComponentsType Manufacturer
Covering fabric TEX 3/ TEX 3.1/ TEX 5 / TEX 7 Veleria S.Giorgio






Inflation system
Automatic device:
  • ALPHA V90000
  • PROSENSOR-PROSENSOR ELITE-MK5
  • MA1 EC
Halkey Roberts

U.M.L.



HAMMAR
Manual device:
  • 840AMX
  • MA1 EC
  • MINIMANUAL-MICROMANUAL-PROSENSOR ELITE
Halkey Roberts

HAMMAR

U.M.L

Oral inflation device:
V730 ROLS43C4/ V73002U
Halkey Roberts
Propellant:
CO2 gas cylinder 60 gr
I.S.I. Components
Tapes NAX1 25mm/40mm Veleria S.Giorgio
Fasteners
  • SS 40
  • HD 40
ITW Nexus Global

National Molding Europe Srl

Inflatable chamber material TEX 1.1 Veleria S.Giorgio
Whistle
  • MW2
  • Duraflex
ITW Nexus Global

National Molding Duraflex

Retroreflective tape
  • Reflexite MG FD-1404
  • H-6750 II / H-3150 I
Reflexite Corporation

Changzhou Wujin Jiangnan


ATTACHMENT TO

CERTIFICATE Nr. MED008717CS

Page 2 of 3



Reference documents
  1. Data sheet MODULO ARTIC, issued by Veleria S.Giorgio and approved by RINA with n° CSST 14683;
  2. Material and components booklet for inflatable lifejackets VSG21-RAW.00 issued by Veleria S.Giorgio and filed by RINA with n° CSST 14684;
  3. Material and components booklet for reference vest n° RTD-s-2009.00 AD2 issued by Veleria S.Giorgio and filed by RINA with n° CSST 14685.
Tests carried out
  • Water performance test n°2017CS0187/02/GMN witnessed by RINA according to MSC 200(80) as amended by MSC.378(93) and filed by RINA with n° CSST 14686;
  • Laboratory Test on inflatable lifejacket issued by RINA Laboratory and filed by RINA with n° CSST 14687;
  • Adult Reference Test Device - Buoyancy Tracking and Verification, report n° 2017/CS/01/87/01/GMN issued and filed by RINA with n° CSST 14688;
  • Water performance test dated 1_12_2021 issued by RINA and filed with n° CSST 20077 in compliance with Res. MSC. 81(70) as amended by MSC.200(80).
Application/Limitation of use

The lifejacket is approved only for use by adult of weight more than 43 Kg and height more than 155 cm and designed to fit person weighing up to 140 kg and with a chest girth of up to 1.750 mm in compliance with MSC.207(81).

The lifejacket can be equipped with the following lights models:

  1. JACK A1, JACKA1-ALK, manufactured by ALCARES ApS;
  2. M4-A, W4-A, manufactured by DANIAMANT ApS;
  3. ALX, ALX-II, manufactured by EPSILOR-EòECTRIC FUEL Ltd;
  4. DAN M3, W3, W3-1, W3-2, manufactured by DANIAMANT ApS;
  5. LNK-SL1, LNK-SL1-W, LNK-S2, LNK-SL2W, LNK-SL3, LNK-SL3W, LNK-SL5, LNK-SL5W, manufactured by XIAMEN LONAKO INDYSRTY & TRADE Co. Ltd.

The lifejacket can be equipped with different position indicating lights and retro-reflective materials EC type Approved in compliance with Directive 96/98/EC as amended.




ATTACHMENT TO
CERTIFICATE No. MED079022CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****