MED471225CS!009ENGD- -  -  N- WB0-MBF-120A DOUBLE BULKHEAD CONFIGURATION -N- S- S- -11/04/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED471225CS/009- N-Apr 10, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED471225CS/009 - (ENG)
Certificate date 11/04/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
WB0-MBF-120A DOUBLE BULKHEAD CONFIGURATION
Applicant DE WAVE S.R.L.
Place of requester Via De Marini 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010-64020886; davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,IMO MSC/Circ. 1120,SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ. 1581
Request 17/10/2025
Expire date 10/04/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED471225CS/009

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type WB0-MBF-120A DOUBLE BULKHEAD CONFIGURATION
Applicant DE WAVE S.R.L.
Via De Marini 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; IMO MSC/Circ. 1120; SOLAS 74 Reg. II-2/9; IMO MSC.1/Circ. 1581
Issued in Genoa on
This Certificate is valid until
April 11, 2026
April 10, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED471225CS/009
Page 1 of 2

Product description

B-0 Class bulkhead certified by RINA with EC Type Examination Certificate No.MED471225CS/008 dated 11/04/2026 composed of two side by side bulkheads having maximum dimensions of 2440 (W) mm x 2500 (H) mm and thickness of 25 mm in which are installed two panels of a B-0 Class syde by side bulkhead certified by RINA with EC Type Examination Certificate No.MED108721CS/003 dated 12 April 2021 having maximum dimensions of 600 mm (W) x 2470 mm (H) and thickness of 16 mm; the two above mentioned panels may be fitted with the following accessories on each side:
- transit of electric cables having diameter of 9 mm composed of
N. 7 holes having diameter of 19 mm fitted with auto extinguishing plastic corrugated tube, having diameter of 16 mm, BOCCHIOTTI type FMP; the transit is fitted, on both the sides, with plastic ring type B-750-625 ELEKTROZUBEHOR;
N. 1 hole having diameter of 28 mm on the exposed side to the fire and diameter of 25.5 mm on the unexposed side to the fire fitted with auto extinguishing plastic corrugated tube, having diameter of 20 mm, BOCCHIOTTI type FMP and fitted, on the side exposed to the fire, with plastic ring type SB-1093-13 on the unexposed side to the fire, with plastic ring type B-1000-875 ELEKTROZUBEHOR.
- electric box composed of carbon steel sheet, 0.6 mm thick, and having dimensions of 185x80x34 mm fitted by steel clips and insulated, on the side not exposed to the fire, by means of one layer of material type KOBEMAT EGL having a density of 130 kg/m3, thickness of 12 mm and dimensions of 580x220 mm. The box may be fitted at a maximum height of 2100 mm.
- U shaped steel profiles, 2 mm thick and having dimensions of 80x10 mm fitted between the bulkhead steel sheets and the mineral wool and glued to the steel sheets on the side exposed to the fire.
Field of application

Fire resisting B-0 Class bulkhead for general application.
Reference documents

De Wave drawing No. DC-01-K1-44 dated 10 May 2019 approved on 12 April 2021 with endorsement No. LABS-2212.
Tests carried out

Tests as per RINA Test Laboratory reports No. 2019CS011692/4 issued on 12 March 2020 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED471225CS/009
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****