Product description:
The SIMATIC S7-1200 is a modular programmable logic control and I/O system with dedicated I/O Board for the installation
on a DIN rail. The system may consist of following components:
Order no. | Designation | Main characteristic |
| Central Processing Unit: |
| 6ES7 212 | CPU 1212C AC/DC/Relay
CPU 1212C DC/DC/Relay
CPU 1212C DC/DC/DC | Power Supply: 230V AC; I/O: 8x DI; 6x Relay
Power Supply: 24V DC; I/O: 8x DI; 6x Relay
Power Supply: 24V DC; I/O: 8x DI; 6x DO |
| 6ES7 214 | CPU 1214C AC/DC/Relay
CPU 1214C DC/DC/Relay
CPU 1214C DC/DC/DC | Power Supply: 230V AC; I/O: 14x DI; 10x Relay
Power Supply: 24V DC; I/O: 14x DI; 10x Relay
Power Supply: 24V DC; I/O: 14x DI; 10x DO |
| Fail-safe Central Processing Unit: |
| 6ES7 212 | CPU 1212FC DC/DC/Relay
CPU 1212FC DC/DC/Relay | Power Supply: 24V DC; I/O: 8x DI; 6x Relay
Power Supply: 24V DC; I/O: 8x DI; 6x Relay |
| 6ES7 214 | CPU 1214FC DC/DC/Relay
CPU 1214FC DC/DC/DC | Power Supply: 24V DC; I/O: 14x DI; 10x Relay
Power Supply: 24V DC; I/O: 14x DI; 10x DO |
| Signal module: |
| 6ES7 221 | SM 1221 DI 16x24VDC | I/O: 16x DI |
| 6ES7 222 | SM 1222 DQ 16x24VDC
SM 1222 DQ 16xRelay | I/O: 16x DO
I/O: 8x Relay |
| 6ES7 223 | SM 1223 DI 8x24VDC, DQ 8x24VDC
SM 1223 DI 8x24VDC, DQ 8xRelay | I/O: 8x DI; 8x DO
I/O: 8x DI; 8x Relay |
| 6ES7 231 | SM 1231 AI 8x | I/O: 8x AI |
| 6ES7 232 | SM 1232 AQ 8x | I/O: 8x AO |
| 6ES7 233 | SM 1233 AI 4x, AQ 4x | I/O: 4x AI; 4x AO |
| Signal board: |
| 6ES7 221 | SB 1221 DI 8x24VDC 100 kHz | I/O: 8x DI |
| 6ES7 222 | SB 1222 DQ 8x24VDC 100 kHz | I/O: 8x DO |
| 6ES7 223 | SB 1223 DI 4x / DQ x5VDC 200kHz | I/O: 2x DI; 2x DO |
| 6ES7 231 | SB 1231 AI 4x | I/O: 4x AI |
| 6ES7 232 | SB 1232 AQ 4x | I/O: 4x AO |
| 6ES7 233 | SB 1233 AI 2x, AO 2x | I/O: 2x AO; 2x AO |
Degree of protection: IP20
TYPE APPROVAL CERTIFICATE |
No. ELE286325XG |
Enclosure - Page 2 of 2 |
SIMATIC S7-1200 G2 PLC series (CPUs, SMs & SBs) |
Documents:
- S71200,G2,system,manual
Test reports:
SIAC Test Lab:
- 250521A,Marine,S7-1200,G2,TestSys1 - TT,Report;
- 250521B,Marine,S7-1200,G2,TestSys2 - TT,Report;
- 250521C,Marine,S7-1200,G2,TestSys3 - TT,Report;
SGS:
- SUW5340278EMC01 System 1 61000-6-2,4-3 (Rev 0);
- SUW5340278EMC02 System 2 61000-6-2,4-3 (Rev 0);
- SUW5340278EMC03 System 3 61000-6-2,4-3 (Rev 0);
Additional manufacturing location:
Siemens Industrial Automation Products Ltd.
Chengdu No. 99, Tian Yuan Road,
High Tech Zone West
611731 Chengdu City, Sichuan Province
P.R. CHINA
Remarks:
- The products fulfill EC-Code: EC-Code: 31
- The equipment fulfils the EMC requirements for installation on the Bridge and Deck Zone by using a filter on power supply lines of type: B84113-C or equivalent with ratings C=2x 0.47µF + 2x 4700pF, L=4x 4.7mH, when shielded cables are grounded on both sides and the modules are installed in suitable EMI enclosure of appropriate dimension (Hoffman CONCEPT EMC enclosure or equivalent).
- The Manufacturer's installation recommendation described above regarding surge protection is to be considered.
- Only Hardware and Firmware successfully tested together in compliance with the regulations as referred to in page one,
according to the declaration of the manufacturer is covered by this certificate.
- Depending on the application, Factory Acceptance and On-board Tests are to be performed in accordance with
requirements for Category II or III Equipment. |
|