MED280525CS!002ENG- -  -  N- JONIO M -N- S- S- -13/06/2025- Marine Equipment- - SN- S- - N-  - 2,349,879B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED280525CS/002- N-Mar 8, 20282349879
 
Form
  Marine Equipment(TO)
Certification N. MED280525CS/002 - (ENG)
Certificate date 13/06/2025
Type Mezzi di salvataggio
Product Lifebuoys
Item Nº MED/1.1

Model or Denomin.
Items
JONIO M
Applicant CANEPA & CAMPI SRL
Place of requester VIA GRAMSCI 4-6  %  16010 Manesseno (GE)  % ITALY
Tel. N.,Fax, Email 0107261006, 0107170020, rcampi@canepaecampi.com
Directive (EU) 2024/1975
Standards IMO Res. MSC 81(70) as amended
Reference Documents SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.,IMO Res.MSC.481(102)
Request 01/06/2025
Expire date 08/03/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Fabio Morbioni S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED280525CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.1
Description Lifebuoys
Type JONIO M
Applicant CANEPA & CAMPI SRL
VIA GRAMSCI 4-6,16010 Manesseno (GE),ITALY
Testing standards IMO Res. MSC 81(70) as amended
Reference standards SOLAS 74 Reg.III/7, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.; IMO Res.MSC.481(102)
Issued in Genoa on
This Certificate is valid until
June 13, 2025
March 8, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED280525CS/002
Page 1 of 2

Product description

Outer diameter: 736 ± 2%

Inner diameter: 436 ± 2%

Elliptical section: major axis 150 ± 7mm / minor axis 100 ± 7mm

Thickness : 3mm

Minimum weight of the lifebuoy: 4000 g

Materials: high density polyethylene RIGIDEX HD5502S

Buoyancy material: EURO POL RCC 128P

Grabline made with a braid of high density polyethylene Ø 10mm

Retro-reflective material, type T-ISS SOLASFLEX according to IMO Res.MSC.481(102).

Reference documents

Technical drawing filed by RINA with n° CSST 2375.

Tests carried out
Report n° 2008/CS/01/5410 issued by RINA on 03/12/2008

Drop test from 60 mt witnessed and filed by RINA with n° 2013/CS/01/361

Field of application

Maximum installation height: 60 mt.

The lifebuoy is intended to operate the quick-release arrangement for the self-activated smoke signal and self-igniting light, attached to the lifebuoy body.





ATTACHMENT TO
CERTIFICATE No. MED280525CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****