Single leaf hinged door with maximum clear light of 900x1900 mm (WxH) and having upper radiused corners with radius of 151 mm. The leaf, having thickness of 89.5 mm and maximum dimensions of 988x1988 mm (WxH) is composed of a steel plate 3 mm thick having the edges bended on the rabbet and of a steel sheet 2 mm thick, fitted in the opposite side. Between the two sheets is fitted the insulating material composed, of two layers of material type PROMAGUARD having, each, thickness of 10 mm and density of 240 kg/m3 and one layer of mineral wool having thickness of 60 mm and density of 100 kg/m3 named ROCKWOOL SEAROX SL620. The PROMAGUARD is fixed to the steel sheets having thickness of 2 mm and the SEAROX SL 620 to the steel plate 3 mm thick, by means of steel pins welded, respectively, with density of 12 and 6 per m2. Inside the leaf are fitted horizontal, vertical, and transversl stiffeners composed of steel tubulars, having dimensions of 40x30 mm and thickness of 2 mm welded to the steel plate having thickness of 3 mm. The leaf may be fitted with a window having maximum clear light of 300x400 mm; the glass, type CONTRAFLAM MARINE A60 (manufacturer Sain Gobain), having thickness of 27 mm, is composed of four glasses and, in between, three thermoexpanding gel layers. The window frame is composed of steel profiles bolted to the leaf with M6 bolts fitted with pitch ranging from 86 up to 88 mm. Between the frame and the glass compound gaskets type Texil, having dimensions of 20x20 mm, are fitted; between the glass edges and the frame one layer of PROMAGUARD, 6 mm thick, is fitted and the glass is sealed by means of silicone type SIKA FIRE. The leaf is equipped with two lever closing devices; one that acts on 2 points on the side opposite to the hinges, is actuated by and handle whereas the other that acts on three points on the hinges side, is actuated by a clevis. The door frame is composed of a carbon steel angular having dimensions of 100x75x7 mm, bolted to the bulkhead by means of M16 bolts (pitch from 152 up to 500 mm), that makes the closure tight with the gasket fitted in the leaf bended edge. The leaf may be fitted, on the upper side, with external door check. The door is fitted, on the lower side, with removable coaming, having height of 250 mm, composed of two steel plate, 5 mm thick each, and internal stiffeners, having the same thickness, fitted with pitch of 125 and 159 mm. The coaming is fitted with internal transversal plate, having thickness of 5 mm, and with M8 screws, fitted with pitch of 294 mm, that fix the same to the coaming sustaining plate, having thickness of 20 mm, fitted in the lower side. The coaming, on the upper and side opposite to the hinges, is fitted with profile having height of 40 mm, on the opposite, with a plate, 7 mm thick and, on the lateral sides, with angular having dimensions of 100x75x7 mm, bolted to the bulkhead by means of M16 bolts (pitch of 175 up to 189 mm); the plate and the profiles makes the closure tight with the gasket fitted in the leaf bended edge. The coaming is insulated, on both sides, by means of one layer of the same mineral wool fixed by means of steel pins welded with pitch of 370 mm. The door may be installed also to an aluminium bulkhead.
|
ATTACHMENT TO
CERTIFICATE Nr. MED024423CS/003
Page 2 of 3 |
Field of application
Fire resistant A-60 Class single leaf hinged door. This Class is confirmed also with the door closed only by means of the lever closing device that acts on 2 points on the side opposite to the hinges.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
Officina Meccanica Mariani drawings No. B-6261-900-26 dated 19 September 2017 approved on 3 May 2018 with endorsement No. LABS-1638.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2017CS013567/3 issued on 3 May 2018 according to IMO 2010 FTP Code Part. 3. |