MED511525CS!053ENGD- -  -  N- MI 30-25/B15 -N- S- S- -20/01/2026- Marine Equipment- - SN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/053- N-Jan 20, 20312370495
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/053 - (ENG)
Certificate date 20/01/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model
Items/Sizes
MI 30-25/B15
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO Circ. MSC 1120,IMO Circ. MSC.1 1581,SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9
Validity 20/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/053

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type MI 30-25/B15
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO Circ. MSC 1120; IMO Circ. MSC.1 1581; SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
January 20, 2026
January 20, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/053
Page 1 of 2

Product description

Bulkhead composed of panels having maximum height of 2400 mm and maximum width of 600 mm. Such panels are composed of a mineral wool layer PAROC Marine Fire Slab fitted with glass veil or ROCKWOOL SeaRox SL470, (certified non combustible in conformity to the requirements of the IMO FTP Code), 25 mm thick and having density of 180 kg/m3, glued to a steel sheet having thickness of 0.7 mm by means of 140 g/m2 of glue named ISOMELFI 3104 MONO or glue named SIKAFORCE 7110 L35. The panel joints consist of ā€œLā€ shaped sheet bent edges, relevant locking and fixing by means of screws fitted with pitch of 350 mm. The joints are covered with a steel profile, 1 mm thick and having dimensions of 57x12 mm, fixed to the joints by means of screws and insulated, on the inside, with a ceramic fiber (certified non combustible in conformity to the requirements of the IMO FTP Code), having thickness of 19 mm and density of 96 kg/m3. The panels are fixed, on the perimeter, to U shaped steel containment profiles having dimensions of 50x35 mm and thickness of 2 mm by means of screws fitted with pitch of 200 mm.
Field of application
Fire resistant B-15 Class bulkhead for general applications.

Reference documents
Marine Interiors SpA drawing No. 06/15 dated 8 July 2015 and Marine Interiors Cabins SpA drawing No. 24PC00342 dated 3 August 2020 approved on 17 July 2015 and on 29 October 2020 respectively with endorsement No. LABS-1104 and No. LABS-2103.

Tests carried out
Tests as per RINA Test Laboratory reports No. 2015CS011145/1 dated 1 December 2015, No. 2020CS012817/1 dated 29 October 2020, No. 2024CS012569/8 and 2024CS012569/9 dated 02 December 2024 issued according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/053
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****