FAB133223VEENG- -  -  N- Grades: A, B, D, AH32, AH36, DH32, DH36 -N- S- S- -28/11/2023- Fabbricanti Approvati- - SN- N- - S-  - 0BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB133223VE- N-Nov 22, 20280
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB133223VE - (ENG)
Certificate date 28/11/2023
Type Approvazione di fabbricanti di materiali
Product Hot rolled steel plates in coils

Model or Denomin.
Items
Grades: A, B, D, AH32, AH36, DH32, DH36
Applicant FERRIERA VALSIDER SPA
Place of requester VIA A. SALIERI 36  %  37050 Oppeano (VR)  % ITALY
Tel. N.,Fax, Email 045 7133336, 0457134563, info@ferrieravaldiser.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 22/11/2028
Responsible Office RINA Venice Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB133223VE
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Hot rolled steel plates in coils
Type Grades: A, B, D, AH32, AH36, DH32, DH36
Applicant FERRIERA VALSIDER SPA
VIA A. SALIERI 36
37050 Oppeano (VR)
ITALY
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until November 22, 2028
_________________________________
RINA Services S.p.A.
Massimo Muzzi
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB133223VE
Enclosure - Page 1 of 1
Grades: A, B, D, AH32, AH36, DH32, DH36
APPROVAL CONDITIONS

Deoxidation practice, condition of supply and thickness:

Normal Strength Steel
Steel Grades Steelmaking 1) Condition of Supply 2) Thickness range [mm]

A BOC, CC AR 3 ÷12

B BOC, CC AR 3 ÷12

D BOC, CC NR 3 ÷12


High Strength Steel
Steel Grades Steelmaking 1) Condition of Supply 2) Thickness range [mm]

AH32 BOC, CC AR 3 ÷12

AH36 BOC, CC AR 3 ÷12

DH32 BOC, CC NR 3 ÷12

DH36 BOC, CC NR 3 ÷12

1) Steelmaking: BOC Basic Oxygen converter – CC Continuous casting


2) Condition of Supply: AR As Rolled -- NR Normalized


Survey conditions:
The coils are to be in compliance in all respects with the relevant RINA rules and are to be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Venice Marine 
28 November 2023
**** NOTICE: This is NOT an official certificate ****