MED072923WSENGD- -  -  N- CQYBII-150N -N- S- S- -14/08/2023- Marine Equipment- - SN- S- - N-  - 1,154,215B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED072923WS- N-Aug 13, 20281154215
 
Form
  Marine Equipment(TO)
Certification N. MED072923WS - (ENG)
Certificate date 14/08/2023
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
CQYBII-150N
Applicant Jiangsu Baizhou Safety Technology Co., Ltd.
Place of requester No.666, Marine Equipment Industrial Park, Xinjie Town Dongtai (Jiangsu)  % CHINA
Tel. N.,Fax, Email +86 21 85758666, +86 18551500678, 505155111@qq.com
Directive (EU) 2022/1157
Standards IMO Res.MSC.81(70), as amended
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470. IMO MSC.1/Circ.1628.
Request 2022/02/23
Expire date 13/08/2028
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Qiang Sun S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED072923WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.4
Description Life jackets
Type CQYBII-150N
Applicant Jiangsu Baizhou Safety Technology Co., Ltd.
No.666, Marine Equipment Industrial Park, Xinjie Town Dongtai (Jiangsu),CHINA
Testing standards IMO Res.MSC.81(70), as amended
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470. IMO MSC.1/Circ.1628.
Issued in SHANGHAI on
This Certificate is valid until
August 14, 2023
August 13, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Qiang Sun
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED072923WS
Page 1 of 3

Main Characteristics


The Inflatable lifejackets (Type: CQYBII-150N) are designed for adult with the following characteristics:
  • Minimum Buoyancy: 150N, buoyance lost after 24 hours : ≤5%;
  • Number of Inflatable Chambers: 2;
  • Time of inflation inshape: ≤5s;
  • With the following main components:
  • Components
    Type
    Manufacturer
    Lifejacket
    Cover Fabric
    300D*300D DTY
    Suzhou Mingwei Water Life Saving Equipment Co., Ltd.
    Inflatable Chamber Material
    210D Single-side 134T
    Zhejiang Kangjia Plastic Products Co., Ltd.
    Trigger Device
    (Inflation system)
    Automatic / Manual Inflation: MK5 (UML-5)
    Ocean Signal Ltd.
    Plastic Air Nozzle
    BZTUBE-1
    Jiangyin Henghu New Material Co.,Ltd.
    Copper Alloy Nozzle
    -
    CO2 Gas Cylinder
    33g
    Nantong Shangcheng Metal Technology Co., Ltd.
    Lifejacket Light
    YYYD
    Jiangsu Dingxiang Marine Equipment Co., Ltd.
    Whistle
    RH/O
    Yuyao City Ditang Village Ronghua Plastic Factory
    Retro-reflective Tape Material
    II Type
    Zhejiang Longyou Daoming Optics & Chemical Co., Ltd.
Application/Limitation of Use

The lifejackets were approved for use only by adult of weight more than 43 Kg and height more than 155 cm.

The lifejackets were designed to fit person weighing up to 140 kg and with a chest girth of up to 1750 mm.

The lifejackets can be equipped with different position indicating lights and Retro-Reflective materials EC Type Approved in compliance with Directive 2014/90/EU as amended.


ATTACHMENT TO
CERTIFICATE No. MED072923WS
Page 2 of 3

Continued:
Design Assessment

The design assessment is based on IMO Res.MSC.48(66)-(LSA Code) as amended by IMO Res.MSC.207(81),
IMO Res.MSC.218(82) and IMO Res. MSC.368(93), etc..

Tests carried out in accordance with revised recommendation on testing of lifesaving appliance, IMO Res.MSC.81(70), Part 1, including IMO Res.MSC.200(80), IMO Res.MSC.226(82), IMO Res.MSC.323(89), IMO Res. MSC.378(93), etc..

Production tests shall be carried out in accordance with IMO Res. MSC.81(70), Part 2 as amended.


Reference Documents

Technical drawings and manuals edited by Jiangsu Baizhou Safety Technology Co.,Ltd and approved and filed by RINA as following:
  • Technical Drawing of Inflatable Lifejacket, approved with RINA No.: SHFP-24162;
  • Operation and Maintenance Manual, filled with RINA No.: SHFP-22849;
  • Component List, approved with RINA No.: SHFP-24306;
  • Main Technical Parameters, approved with RINA No.: SHFP-23263.
Tests Carried Out

Tests carried out in accordance with Revised Recommendation on Testing of Life-Saving Appliances, IMO Res. MSC.81(70), Part 1, including IMO Res. MSC.200(80), IMO Res. MSC.226(82), IMO Res. MSC.323(89) and IMO Res. MSC.378(93) as below:
  • Evaluation and Test Report (Ref No.: 2022073) for Inflatable Lifejacket carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on Mar.04.2022~Jun.15.2023, and filled with RINA No.: SHFP-24033;
  • RTD Test Report on Serial Number SN37 for Inflatable Lifejackets carried out by Wuhan Testing Center of Marine Life-saving Appliances dated on Jun.01.2023, and filled with RINA No.: SHFP-22853.

Test Reports for Inflatable Lifejackets materials and components:
  • Test report (Ref. No.: 2010060) for Buckle, filled with RINA No. SHFP-22855;
  • Test report (Ref. No.: 2012163) for Wistles, filled with RINA No. SHFP-22856;
  • Test report (Ref. No.: 2019114) for Fabric, filled with RINA No. SHFP-22857;
  • Test report (Ref. No.: 2022252) for Structural Webbing, filled with RINA No. SHFP-22858.
  • Test report (Ref. No.: 2022253) for Sewing Thread, filled with RINA No. SHFP-22859.

Certificate of Conformity for CO2 Gas Cylinders:
  • Certificate of Conformity for CO2 Gas Cylinders (33g) (Ref No.: SCC(18)-5093A), filled with RINA No.: SHFP-22846.
Marking of Product

The product is to be indelibly marked with name of manufacturer, type designation and date of manufacture. The marking shall comply with the LSA Code (IMO Res. MSC.48(66)), item 1.2.2.9.




ATTACHMENT TO
CERTIFICATE No. MED072923WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Qiang Sun
**** NOTICE: This is NOT an official certificate ****