FAB149926XGENG- -  -  N- Pipes and Tubes -N- S- S- -27/01/2026- Fabbricanti Approvati- - SN- N- - S-  - 492,752BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB149926XG- N-Jan 26, 2031492752
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB149926XG - (ENG)
Certificate date 27/01/2026
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio saldati in acciaio inossidabile

Model or Denomin.
Items
Pipes and Tubes
Applicant NiroSan Edelstahlrohr GmbH
Place of requester Buckower Chaussee 133  %  12277 Berlin  % Germany
Tel. N.,Fax, Email 049 30 74303329 ---, sabine.eckert@sanha.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 26/01/2031
Responsible Office HAMBURG
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB149926XG
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Welded stainless steel pipes and tubes
Type Pipes and Tubes
Applicant NiroSan Edelstahlrohr GmbH
Buckower Chaussee 133
12277 Berlin
Germany
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until January 26, 2031
_________________________________
RINA Services S.p.A.
Adinan Isacai

Adinan Isacai

This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB149926XG
Enclosure - Page 2 of 2
Pipes and Tubes

APPROVAL CONDITIONS

Size range:
  • Outside diameter: max. Ø 114,3 mm
  • Wall thickness: max. 5 mm

Manufacturing process: EFW (Electric Fusion Welded).
Manufacturing method: Gas Tungsten-Arc Welding or Plasma-Arc Welding
Heat treatment: solution treated condition at 1050 - 1240 °C.
Non destructive examination of welded seam: ET (Eddy Current Testing).
Survey conditions: the pipes and tubes are to be in compliance in all respects with the requirements specified in Part D, Ch 2, Sec 2of the RINA Rules and are to be tested accordingly.

Dimension Steel type / grade
Recognized standards
Outside diameter [mm]
Wall thickness WD [mm]
Austenitic steel
Ferritic steel
DIN EN 10217-7
AD 2000 W2
Ø 12 - 114,3
WD 1,0 - 5,0
1.4301, 1.4306, 1.4307, 1.4401, 1.4404, 1.4541, 1.4571Not applicable
DIN EN 10312Ø 15 - 108
WD 0,6 - 2,0
1.4301, 1.4401,
1.4404
1.4521
ASTM A249
ASTM A312
Ø 12 - 114,3
WD 1,0 - 5,0
UNS S30400
UNS S30403
UNS S31600
UNS S31603
UNS S31635
UNS S32100
Not applicable

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

HAMBURG May 13, 2026
**** NOTICE: This is NOT an official certificate ****