MED171124CSENGF- -  -  N- B15PRO2AA -N- S- S- -15/04/2024- Marine Equipment- - SN- S- - N-  - 1,047,638B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED171124CS- N-Jan 12, 20291047638
 
Form
  Marine Equipment(TO)
Certification N. MED171124CS - (ENG)
Certificate date 15/04/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
B15PRO2AA
Applicant S.I.N. SERVICE SRL
Place of requester VIA DEL PESCATORE 3  %  80053 Castellammare Di Stabia (NA)  % ITALY
Tel. N.,Fax, Email 081 8018602, ---, dluisa@officinedmb.com
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 10/04/2024
Validity 12/01/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED171124CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type B15PRO2AA
Applicant S.I.N. SERVICE SRL
VIA DEL PESCATORE 3,80053 Castellammare Di Stabia (NA),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
April 15, 2024
January 12, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED171124CS
Page 1 of 2

Product description

Double asimetric leaf hinged door with maximum clear light of 1200x2100 mm (WxH). The primary leaf, having maximum dimensions of 913x2110 mm (WxH) and the secondary leaf, having maximum dimensions of 313x2110 mm (WxH) are composed of two steel sheets, 1.2 mm thick each, and, in between, the insulating material composed of a layer of material named PROMASIL MARINE, 35 mm thick and having density of 285 kg/m3. The insulating material is glued to the steel sheets by means of 200 g/ m2 of adhesive type PROTOPUR AE 100. The door frame is composed of an hollow steel profile, 1.2 mm thick and having dimensions of 40x48.7 mm; the frame, on the upper side has dimensions of 125x48.7 mm and is filled with mineral wool (certified non combustible in conformity to the requirements of the IMO FTP Code) having density of 150 kg/m3. The primary leaf may be fitted with a rectangular window having maximum clear light of 300x400 mm (WxH); the glass compound, type PYROBELYTE 12 (manufacturer Glaverbel) and having total thickness of 12 mm, is composed of 3 panes and, in between, 2 layers of thermo-expanding gel. The window frame is composed of stainless steel profiles having thickness of 1.2 mm fixed to the leaf with 4mm rivets fitted with pitch of 100 mm; between glass and frame are fitted gaskets type PAPERSEAL ECO (thickness of 3 mm).
Field of application
Fire resistant B-15 Class double leaf hinged door. The door is also in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
SIN SERVICE drawing No. B15PRO2AA dated 12 October 2018 approved on 3 December 2018 with endorsement No. LABS-1780.
Tests carried out
Test as per RINA Test Laboratory report No. 2018CS013455/1 issued on 18 December 2018 according to Appendix 1 of IMO 2010 FTPC Part 3.

This certificate annuls and replaces the certificate No. MED345518CS/001 dated 14 January 2019 due to mention of the additional requirements indicated on the "Agreement between the EEA EFTA States and the United States of America"




ATTACHMENT TO
CERTIFICATE No. MED171124CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****