Product description:
The ET200AL series is a distributed I/O system are designed for installation on a level firm surface or on an aluminum profile using.
Order no | Designation |
6ES7 157-1AB00-0AB0 | PROFINET Interface-Modul IM 157-1PN |
6ES7 157-1AA00-0AB0 | PROFIBUS Interface-Modul IM 157-1DP |
| 6ES7 157-1MA00-0AB0 | Interface IM 157-1 MF |
6ES7 141-5AF00-0BA0 | DI 8x24VDC 4xM12 |
6ES7 141-5AH00-0BA0 | DI 16x24VDC, 8xM12 |
6ES7 141-5AH00-0BL0 | IO-Link, DI 16x24VDC, 8xM12 |
6ES7 141-5BF00-0BA0 | DI 8x24VDC, 8xM8 |
6ES7 141-5BF00-0BL0 | IO-Link, DI 8x24VDC, 8xM8 |
6ES7 142-5AF00-0BA0 | DQ 8x24VDC/2A, 4xM12 |
6ES7 142-5AF00-0BL0 | IO-Link, DQ 8x24VDC/2A, 4xM12 |
6ES7 143-5AF00-0BA0 | DIQ 4+DQ 4x24VDC/0.5A, 4xM12 |
6ES7 143-5BF00-0BA0 | DIQ 4+DQ 4x24VDC/0.5A, 8xM8 |
| 6ES7 143-5BF50-0BA0 | DIQ 8x24VDC/0.5A, 8xM8 |
6ES7 143-5BF00-0BL0 | IO-Link, DIQ 4+DQ 4x24VDC/0.5A, 8xM8 |
6ES7 143-5AH00-0BA0 | DIQ 16x24VDC/0.5A, 8xM12 |
6ES7 143-5AH00-0BL0 | IO-Link, DIQ 16x24VDC/0.5A, 8xM12 |
6ES7 144-5KD00-0BA0 | AI 4xU/I/RTD, 4xM12 |
6ES7 144-5KD50-0BA0 | AI 4xRTD/TC, 4xM12 |
6ES7 145-5ND00-0BA0 | AQ 4xU/I, 4xM12 |
| 6ES7 147-5JD00-0BA0 | CM 4xIO-Link, 4xM12 |
| 6ES7 147-5JJ00-0BA0 | CM 8xIO-Link, 8xM12 |
| 6ES7 147-5JD01-0BA0 | CM 4xIO-Link, 4xM12 |
6ES7 194-2CA00-0AA0 | Power Distribution 24 V DC |
Power supply: 24V DC
Power supply for CM4xIO-Link, 4xM12: Ue min. 20 V (not allowd for battery supply)
Degree of protection: IP65/ IP67
Documents:
- A5E31861578-AH dated 09/2020
Test reports:
SIEMENS AG:
- SIMATIC Type Test - 2016-01 dated 22.03.2016, 2017-02 dated 03.03.2017, 2021-08 dated 29.07.2021, dated 26.06.2025
- Test Report: 20-E008814-BM-A01
TYPE APPROVAL CERTIFICATE |
No. ELE239925XG |
Enclosure - Page 2 of 2 |
SIMATIC ET200AL |
Additional manufacturing location:
Siemens Industrial Automation Products Ltd.
Chengdu No. 99, Tian Yuan Road,
High Tech Zone West
611731 Chengdu City, Sichuan Province
P.R. CHINA
Siemens AG
Breslauer Strasse 5
90766 Fürth
Germany
Remarks:
- The products fulfill EC Code: 31.
- The equipment fulfils the EMC requirements for installation on the Bridge and Deck Zone if filter of type: B84113-C or
equivalent with ratings C=2x 0.47µF + 2x 4700pF, L=4x 4.7mH is used.
- The product IO-Link, DIQ 4+DQ 4x24VDC/0.5A 8xM8 (6ES7 143-5BF00-0BL0) is not prearranged for the use on the Bridge and
Deck Zone.
- The Manufacturer's installation recommendation described above regarding surge protection is to be considered.
- Only Hardware and Firmware successfully tested together in compliance with the regulations as referred to in page one,
according to the declaration of the manufacturer is covered by this certificate.
- Depending on the Application, Factory Acceptance and On-board Tests are to be performed in accordance with requirements
for Category II or III Equipment.
- Surge immunity: External protective circuits required for DC systems. See the current system manual (A5E03461486) for recommendations.
- The product is to be installed according to manufacturer's instruction. |
|