- The pilot ladder is assembled with two side ropes on each side continuous from the top of the ladder to the bottom(sisal and manila rope meeting ISO 1181:2004 )
- Each step is supported by each side rope.
- Steps:
The four lowest steps are made of rubber material. L X B X H (525 x 115 x 25 at thinnest point) mm
The remaining steps except spreader steps are made of hardwood material. L X B X H (525 x 115 x 25 at thinnest point) mm
The spreader steps are made of hardwood material. L X B X H (1800 x 115 x 25 at thinnest point) mm
- Each side rope has a breaking strength of at least 24 kN.
- Length of ladder: 4~30 m.
Reference Documents
Technical drawings and manuals approved and filed by RINA listed on Approval letter No. : SHST/2024/1258/XUH and SHFP/2025/80/ZW002. Tests Carried Out
Pilot ladder has been tested in compliance with ISO 799-1:2019, and test report is filed by RINA with No.: SHST-52900 and SHFP-29758.
Remarks
- Each ladder is to be marked in compliance with ISO 799-1:2019, Clause 8.
- Each replacement step is to be marked in compliance with ISO 799-1:2019, Clause 8.
Note
Renewal of Previous EC Type Examination (Module B) Certificate No.: MED414624WS/001, with below modification:
- Add one more type of side rope made of manila rope.