MED165722CS!002ENGD- -  -  N- COFLEX DCF1 -N- S- S- -21/12/2022- Marine Equipment- - SN- S- - N-  - 2,338,225B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED165722CS/002- N-May 12, 20272338225
 
Form
  Marine Equipment(TO)
Certification N. MED165722CS/002 - (ENG)
Certificate date 21/12/2022
Type Protezione antincendio
Product Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Item Nº MED/3.15c

Model or Denomin.
Items
COFLEX  DCF1
Applicant COFI SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA FRATELLI ARPE 49  %  16038 Santa Margherita Ligure (GE)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2022/1157
Standards EN ISO 15540:2016(E), EN ISO 15541:2016(E)
Reference Documents Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Request 01/02/2022
Expire date 12/05/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Rosario Pitruzzo S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED165722CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.15c
Description Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Type COFLEX  DCF1
Applicant COFI SOCIETA' A RESPONSABILITA' LIMITATA
VIA FRATELLI ARPE 49,16038 Santa Margherita Ligure (GE),ITALY
Testing standards EN ISO 15540:2016(E), EN ISO 15541:2016(E)
Reference standards Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Issued in Genoa on
This Certificate is valid until
December 21, 2022
May 12, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Rosario Pitruzzo
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED165722CS/002
Page 1 of 3
  • MATERIALS/COMPONENTS
Non-metallic expantion joints, type COFLEX DCF1 manufactured by "ISOPREN s.r.l."
  • Inner side: aging resistant synthetic rubber,
  • Reinforcement: textile braids covered with rubber,
  • Insert: steel,
  • Cover: aging resistant synthetic rubber,
  • Couplings: flange (from ND25 to ND250) and AGR-K fittings (from ND25 to ND40) made of carbon and stainless steel

provided with a flame-proof guard ( COFLEX CF1 ) composed by :
  • internal layer "2002 AL HT" aluminized glass fabric
  • heat insulation layer composed by:
    1. soft temper aluminium foil, nominal thickness 0.050 mm
    2. "SUPERWOOL 607" glass fiber for high temperature (1100 °C) having nominal thickness 13 mm and density 128 Kg/m3
    3. "FILOMAT AS 800" not flammable glass fiber having nominal thickness 6 mm and density 130 Kg/m3
  • external layer "2002 AL HT" aluminized glass fabric
A plate, showing the instruction according to technical specifications, will be fitted on the guard external surface.
REFERENCE DOCUMENTS

COFI drawings no. 040546 rev. 2 Tables 1/2 and 2/2, approved by RINA with nos. PPVT-12001 and PPVT-12002.
COFI drawing no. 040553 rev. 2, approved by RINA with no. PPVT-12003.
COFI technical specification no. 110069 rev. 1 dated January 2011, filed by RINA with no. PPVT-11955.
COFI technical instruction no. 0029 rev. 7 dated January 2011, filed by RINA with no. PPVT-11956.
COFI drawings no. 040631 rev. 3 approved by RINA with nos. PPVT-26700 to PPVT-26703.
TECHNICAL DATA

Nominal Diameter 25 to 250 (mm)
Maximum working pressure Pe 1,6 (MPa)
Working temperature: - 10 °C to +90 °C (according to information on the approved drawings)



ATTACHMENT TO
No. MED165722CS
page 2 of 3


TEST CARRIED OUT

Fire resistance tests carried out by RINA Fire Protection Research Laboratory on 01-02/02/2011 as per test reports Nos. 2011CS01173/6, 2011CS01173/7, 2011CS01173/8, 2011CS01173/9 and on 29/05/2017 as per test reports Nos. 2017CS01639 and 2017CS01639/1
REMARKS


Flanges are to be in accordance with a recognized standard.

This certificate annuls and replaces the certificate No. MED093717CS dated 09/20/2017 due to renewal, without any modification in the equipment, as per Manufacturer's request.

This certificate also annuls and replaces the certificate No. MED165722CS dated 05/13/2022 due to misprinting in the certificate.




ATTACHMENT TO
CERTIFICATE No. MED165722CS/002
Pages 3 of 3

The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Rosario Pitruzzo
**** NOTICE: This is NOT an official certificate ****