Single leaf hinged door with maximum clear light of 1000x2100 mm (WxH). The leaf, having maximum dimensions of 1028x2109 mm (WxH), is composed of two steel sheets having, each, thickness of 0.8 mm assembled by means of rivets having diameter of 4 mm and, in between, the insulating material. This material is composed of one layer of mineral wool type PAROC MARINE SLAB 150 or KNAUF INSULATION MHTB 700 or ROCKWOOL SEAROX SL 440 having thickness of 40 mm and density of 150 kg/m3 glued to the steel sheets by means of 150 g/m2 of glue named PROTOPUR AE100 or SIKAFORCE 7110L55 or DUNAPOL AD4020. The perimeter of the leaf is fitted with C shaped stainless or carbon steel profiles 0.8 mm thick and, on the hinges side, with a C shaped steel profile having thickness of 1.5 mm. The door frame is composed of an hollow carbon steel or stainless steel profile having thickness of 1.2 mm and it is fitted with a C shaped steel profile 0.8 mm thick; the horizontal element of the frame is insulated with the same mineral wool as the leaf. The frame is fixed to the bulkhead by means of screws type AF 4.2 x 50 mm, five on each side. The door may be equipped with a peephole and a drop down sill. The door is fitted with three stainless steel hinges and a closure system actuated by an handle.
The door may be manufactured also by:
- Metaldesi Srl - Via Ermanno Casoli 4 - 60044 Fabriano (AN) - Italy
- Wingeco s.r.l. - Sergio Pugliara - Via Geirato 150R/152R 16138 Genova - Italy
- Zanetti Bruno s.r.l. - Giuseppe Bizzotto - via del santo 205, 35010 Limena (PD) - Italy
- Inoxking - Sergio Constenla - Via Cal Longa 22, Vazzola (TV) - Italy
Field of application Fire resistant B-15 Class single leaf hinged door with fire hazard on both sides. The door fitted with carbon steel frame and without drop down sill is also in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- door without window
- maximum door size tested
- door used with a fire tested frame designReference documents PRECETTI drawing No. PR105 Rev. 6 dated 31 January 2018 approved on 15 February 2018 with endorsement No. LABS-1609.
Tests carried out Tests as per RINA Test Laboratory Report No. 2015CS012884/1 dated 15 December 2015 and Istituto Giordano Test report No. 346871 dated 21 November 2017 issued according to IMO 2010 FTP Code Part 3. |