MED451225CSENGD- -  -  N- AG JOINT PRO -N- S- S- -17/10/2025- Marine Equipment- - SN- S- - N-  - 578,803B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED451225CS- N-Oct 16, 2030578803
 
Form
  Marine Equipment(TO)
Certification N. MED451225CS - (ENG)
Certificate date 17/10/2025
Type Protezione antincendio
Product Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Item Nº MED/3.15c

Model or Denomin.
Items
AG JOINT PRO
Applicant ALFAGOMMA HYDRAULIC SPA
Place of requester VIA E. MATTEI 6  %  64020 Castelnuovo Vomano (TE)  % ITALY
Tel. N.,Fax, Email 0861448621, Federico.Fedele@alfagomma.com, INFO@ALFAGOMMA.IT
Directive (EU) 2025/1533
Standards EN ISO 15540, EN ISO 15541
Reference Documents Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Request 08/04/2020
Expire date 16/10/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Rosario Pitruzzo S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED451225CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.15c
Description Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Type AG JOINT PRO
Applicant ALFAGOMMA HYDRAULIC SPA
VIA E. MATTEI 6,64020 Castelnuovo Vomano (TE),ITALY
Testing standards EN ISO 15540, EN ISO 15541
Reference standards Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Issued in Genoa on
This Certificate is valid until
October 17, 2025
October 16, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Rosario Pitruzzo
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED451225CS
Page 1 of 2
MATERIALS/COMPONENTS/TECHNICAL DATA
Non-metallic expantion joints, type AG JOINT PRO:

Diameters: DN32 - DN40 - DN50 - DN65 - DN80 - DN100 - DN125 - DN150 - DN200 - DN250;


Working pressure: 16 bar;
Working temperature: min -10°C, +90°C with peaks to +110°C;
Expantion joints material: Internal NBR (ACN); External NBR (ACN), CR;
Flange: CuSN6, CuNi, Fe510 and AISI316
Flame-proof guard (O-A-A-Q-01 Rev. 02)

REFERENCE DOCUMENTS

Constructional drawings and specification:



PPVT-36660DISEGNI AGJOINT PRO

TEST CARRIED OUT
Fire tests ISO 15540:2016 and ISO 15541:2016, dated 04/09/2020
reports no. 2020CS012115/001-002-003-004
RINA Laboratory - Calata Gadda Genova

This certificate supersedes certificate no. MED343621CS





ATTACHMENT TO
CERTIFICATE No. MED451225CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Rosario Pitruzzo
**** NOTICE: This is NOT an official certificate ****