1. Product Description
The SQT series electric actuator consists of a motor, gearbox, worm gear mechanism, output shaft,local operation box, failsafe device,handwheel switching mechanism, etc., which can provide multiple power sources. The working principle is that the motor transmits power to the output shaft through the gearbox and worm gear mechanism to achieve power transmission. Control operations can be carried out through various communication methods such as digital, analog, and CAN Open, and local operation boxes can be equipped according to requirements to achieve local operations. The system is flexible in configuration, safe and reliable, and suitable for ships. The enclosure protection level is IP68.
+ Model Specifications
SQT7 Series
Model Code | SQT70050 | SQT70100 | SQT70300 | SQT70500 | SQT71000 | SQT72000 |
Max Torque (Nm) | 50 | 100 | 300 | 500 | 1000 | 2000 |
Motor Power (W) | 60-80 | 70-90 | 50-80 | 60-110 | 130-300 | 200-450 |
Ambient Temperature | -25~+55℃ |
Enclosure protection | IP68(30m 72h) |
Opening Angle | 0~90°±5° |
Explosion-proof protection | Ex db ⅡC T4 Gb (Option) |
Power Supply | AC110V、AC220V、AC380V、AC440V、DC24V |
Interface | "Digital Active" type; "Digital" type; "CANOpen" type; "Analog" type; "DualCAN" type. |
SQT6 Series
Model Code | SQT60080 | SQT60100 | SQT60200 | SQT60300 | SQT60600 | SQT61200 | SQT63000 |
Max Torque (Nm) | 80 | 100 | 200 | 300 | 600 | 1200 | 3000 |
Motor Power (W) | 12-15 | 15-25 | 25-30 | 40-60 | 60-90 | 90-120 | 140-200 |
Ambient Temperature | -20~+50℃(Battery),-25~+55℃(STD) |
Enclosure protection | IP68(10m 72h) |
Opening Angle | 0~90°±5° |
Power Supply | AC110V、AC220V、AC380V、AC440V、DC24V |
Interface | "Digital Active" type; "Digital" type; "CANOpen" type; "Analog" type; "DualCAN" type. |
TYPE APPROVAL CERTIFICATE
No. ELE684524WS
Enclosure - Page 2 of 2
SQT7 Series & SQT6 Series
+ Rules for article number of Product Type
□□.1□□.□□
①② ③④ ⑤⑥
① Represents the product series: 6 for Series 6; 7 for Series 7.
② Represents the rated torque: 0050: 50Nm ~ 3000: 3000Nm (Series 6 Max. 3000Nm, Series 7 Max. 2000Nm).
③ Represents the interface type: 0: "Digital Active" type; 1: "Digital" type; 2: "CANOpen" type;
3: "Analog" type; 5: "DualCAN" type.
④ Represents the configuration type: 0: Without local operation box; 1: With local operation box.
⑤ Represents special definitions: 1: Standard type version 1st design; B: With failsafe(Fail safe, Power off reset);
X: Explosion-proof type: Ex db IIC T4 Gb.
⑥ Represents the rated voltage: 1: AC110V; 2: AC220V; 3: AC380V; 4: AC440V; 7: DC24V.
2. Reference Documents
+ Application form: Filed by RINA with drawing No. SHEL-24063.
+ Test procedure: Filed by RINA with drawing No. SHEL-24064.
+ Products drawings: Filed by RINA with drawing No. SHEL-24065~ SHEL-24069.
+ Products Specification: Filed by RINA with drawing No. SHEL-24070.
+ Manufacturer general information: Filed by RINA with drawing No. SHEL-24071.
+ Test Reports: Filed by RINA with drawing No. SHEL-24073.
+ Routine Test Reports: Signed by Surveyor and filed by RINA with drawing No. SHEL-24074.
+ Narrative report: Filed by RINA with drawing No. SHEL24075.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-24072.
3. Note/Remark
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Ex certification is not covered by this certificate, Applications in hazardous areas are to be approved in each case according to the Rules and Conditions for Safe Use specified in a valid Ex-Certificate issued by a Notified or Recognized Certification Body.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment. |
|