MED384725CSENG- -  -  N- NAVYCROSS P-B15 System -N- S- S- -29/10/2025- Marine Equipment- - SN- S- - N-  - 852,534B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED384725CS- N-Oct 28, 2030852534
 
Form
  Marine Equipment(TO)
Certification N. MED384725CS - (ENG)
Certificate date 29/10/2025
Type Protezione antincendio
Product Penetrations through "B" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Item Nº MED/3.27b

Model or Denomin.
Items
NAVYCROSS P-B15 System
Applicant MARINONI S.P.A.
Place of requester VIA TAGLIOLINI 26 B  %  16152 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 659 651, 010 659 65 60, marinoni@marinoni.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1655
Request 07/08/2025
Expire date 28/10/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED384725CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.27b
Description Penetrations through "B" Class divisions: (b) pipe, duct, trunk, etc. penetrations
Type NAVYCROSS P-B15 System
Applicant MARINONI S.P.A.
VIA TAGLIOLINI 26 B,16152 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/9, IMO Res. MSC.1/Circ.1655
Issued in Genoa on
This Certificate is valid until
October 29, 2025
October 28, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED384725CS
Page 1 of 2

Product description

B-15 Class bulkhead, having maximum height of 1200 mm, type ISOBULK B15 manufactured by Marinoni SpA and certified by RINA with Type Examination Certificate No. MED351020CS dated 21 January 2021 equipped with the following symmetrical penetration systems composed by a expandig collar made of 0.6mm thick galvanized steel casing, filled with "self expanding sealer" by Marinoni, sealed to the bulkhead on both sides by means of a cord 10 mm x 10 mm of material type NAVYCROSS:

Transit length 90 mm
Pipe
Material
min.
Diameter
(mm)
max.
Diameters
(mm)
min. thick.
(mm)
max. thick.
(mm)
min.
Transit Ext.
Diameters (mm)
max.
Transit Ext.
Diameters (mm)
Plastic
16
40
1.8
4.5
27.2
51.2
Multilayer
16
40
1.8
3.5
27.2
51.2
Transit length 180 mm
Pipe
Material
min.
Diameter
(mm)
max.
Diameters
(mm)
min. thick.
(mm)
max. thick.
(mm)
min.
Transit Ext.
Diameters (mm)
max.
Transit Ext.
Diameters (mm)
Plastic
40
125
4.5
11
61.2
146.2
Multilayer
16
40
1.8
3.5
37.2
61.2
Field of application
Fire resistant B-15 Class penetration of plastic and multi layers pipes through bulkheads.
Reference documents
MARINONI spa drawing No. DWG 11-25 dated 27 October 2025 approved with endorsement.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2025CS013847 dated 25 October 2025 issued according to FTP Code 2010 Part. 3




ATTACHMENT TO
CERTIFICATE No. MED384725CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****