MED678724WSENGD- -  -  N- HJZ-3 -N- S- S- -24/01/2025- Marine Equipment- - SN- S- - N-  - 1,072,555B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED678724WS- N-Jan 23, 20301072555
 
Form
  Marine Equipment(TO)
MED717524WS
Certification N. MED678724WS - (ENG)
Certificate date 24/01/2025
Type Mezzi di salvataggio
Product Sistemazioni per il galleggiamento libero delle zattere di salvataggio (dispositivi a distacco idrostatico)
Item Nº MED/1.16

Model or Denomin.
Items
HJZ-3
Applicant SUZHOU HAIXING MARITIME EQUIPMENT CO., LTD.
Place of requester No.588, Yuexiu Road, FOHO New & Hi-Tech Industrial Development Zone,Wujiang, Suzhou (Jiangsu)  % CHINA
Tel. N.,Fax, Email +86 138 14898152, +86 512 63182718, szpg@haixing.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.81 (70), as amended
Reference Documents SOLAS 74 Reg. III/13, SOLAS 74 Reg. III/26, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC/Circ.811, IMO MSC.1/Circ.1630 Rev 2.
Request 2024-11-13
Expire date 23/01/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED678724WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.16
Description Float-free arrangements for liferafts (hydrostatic release units)
Type HJZ-3
Applicant SUZHOU HAIXING MARITIME EQUIPMENT CO., LTD.
No.588, Yuexiu Road, FOHO New & Hi-Tech Industrial Development Zone,Wujiang, Suzhou (Jiangsu),CHINA
Testing standards IMO Res. MSC.81 (70), as amended
Reference standards SOLAS 74 Reg. III/13, SOLAS 74 Reg. III/26, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC/Circ.811, IMO MSC.1/Circ.1630 Rev 2.
Issued in Genoa on
This Certificate is valid until
January 24, 2025
January 23, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED678724WS
Page 1 of 2

Product Description

“HJZ-3”, is intended for fitting float free arrangemetns for liferafts.
- Main Material: SUS316 Stainless Steel
- Tensile Strength: ≥15 KN
The release depth is from 2 m to not more than 4 m.
Application/Limitation
The onboard installation of product shall be carried out according to manufacturer’s instruction.

After installation onboard, unit have to be marked with expiry date at which it must be replaced.

Unit has three years lifetime and does not need annual service, maintenance or spare parts during that period.

The design assessment is based on IMO Res. MSC.48(66) as amended by IMO Res. MSC.207(81) and IMO Res.MSC.218(82).

Each product is to be supplied with its manual for installation and use.

Tests Carried Out
Tests are documented in accordance with recommendation on testing of Lifesaving Appliances, IMO Res. MSC.81(70)Part 1, as amended by IMO Res. MSC.226(82).
- Test Report (Ref No.: SZHX2024121601) carried out by Suzhou Haixing Maritime Equipment Co., Ltd, and filed by RINA with No.: SHFP-29597.
- Evaluation and Test Report (Ref No.: 2021270) issued by Wuhan Testing Center of Marine Life-saving Appliances, and filed by RINA with No.: SHFP-29598.
Reference Documents
Technical Drawings and Manuals approved and filed by RINA Listed on Approval Letter No. SHFP/2024/1322/SQN.
Marking of Product
The product is to be indelibly marked with name and address of manufacturer, type designation, serial number, date of manufacture, whether the unit is suitable for use with a liferaft with a capacity of more than 25 persons (ref. LSA Code 4.1.6.3.6).




ATTACHMENT TO
CERTIFICATE No. MED678724WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****