MED387926CSENG- -  -  N- Marine Rubber&Plastic/PVC Floor -N- S- S- -14/07/2026- Marine Equipment- - SN- S- - N-  - 2,373,048B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED387926CS- N-Jul 13, 20312373048
 
Form
  Marine Equipment(TO)
Certification N. MED387926CS - (ENG)
Certificate date 14/07/2026
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Item Nº MED/3.18c
USCG Category N° 164.117

Model or Denomin.
Items
Marine Rubber&Plastic/PVC Floor
ZY918
Applicant Hebei Zeyi New Materials Science & Technology Co., Ltd.
Place of requester 50 meters west of Cangxin Driving School, National Highway 104, Yaoguantun Town, Cangxian County Cangzhou (Hebei)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Request 08/05/2026
Expire date 13/07/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED387926CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.18c
USCG Category Nº 164.117
Description Surface materials and floor coverings with low flame-spread characteristics: (c) floor coverings
Type Marine Rubber&Plastic/PVC Floor
ZY918
Applicant Hebei Zeyi New Materials Science & Technology Co., Ltd.
50 meters west of Cangxin Driving School, National Highway 104, Yaoguantun Town, Cangxian County Cangzhou (Hebei),CHINA
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Issued in Genoa on
This Certificate is valid until
July 14, 2026
July 13, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED387926CS
Page 1 of 2

Product description



Marine Rubber&Plastic PVC Floor ZY918, composed of PVC resin power, natural rubber, stabilizer, having the following characteristics:
  • nominal density: 1420 kg/m3 ;
  • nominal thickness range: 2-3 mm.
Colour: light grey.
Field of application

As floor covering.

The product may be glued to any metallic support, any non-combustible support and any material having low flame spread characteristics by means of adhesive named EP-06 (manufacturer Jingjiang Asian-pacific special Material Co., Ltd) in the amount of 100 g/m2.

Tests carried out

Tests as per SGS-CSTC Standards Technical Services Co., Ltd Anji Branch Test Laboratory reports Nos. AJFTS26004001R03_EN, AJFTS26004001R02_EN, AJFTS26004001R01_EN dated 5 June 2026 issued according to:
  • IMO 2010 FTP Code Part 5;
  • IMO 2010 FTP Code Part 2.

Tests as per FEFTC (Far East Fire Testing Centre) Test Laboratory report No. FT26064 dated 9 February 2026 issued according to:
  • IMO 2010 FTP Code Part 5.




ATTACHMENT TO
CERTIFICATE No. MED387926CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****