|
CERTIFICATO DI OMOLOGAZIONE |
|
BIL |
|
Vuoto |
|
Querysave |
|
|
 |
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP247725CS
|
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.
|
| Descrizione |
MATERIALI FONOASSORBENTI |
| Description |
MATERIALI FONOASSORBENTI |
| Tipo |
Pannelli fonoassorbenti: |
| Type |
· 65.099.00 ,· 65.097.01 ,· 65.094.00 ,· 65.100.00,· 65.100.05 ,· 65.100.75,· 65.091.00 ,· 65.101.00,· 65.100.50,· C16135-225944,· C16135-225945
|
Richiedente
Applicant |
OSCULATI S.r.l.,VIA DELLA MOSCOVA 3,20121 Milano (MI),ITALY |
| Norme di riferimento |
ISO 4589-3 |
| Reference standards |
ISO 4589-3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
_________________________________
RINA Services S.p.A.
|
| |
Giulia CresciStefano Moscatelli
|
| |
| Rilasciato a Viareggio il 12 Maggio 2025.
Questo Certificato è valido fino al 11 Maggio 2030 |
| |
| Issued in Viareggio on May 12, 2025. This Certificate is valid until May 11, 2030 |
| |
|
|
|
|
|
|
|
|
|
Questo Certificato e' composto di 1 pagina e di 1 allegato |
|
This certificate consists of this page and 1 enclosure |
Termini e condizioni di validità/Terms and validity
conditions
- Il presente certificato potrà perdere validità nel
caso siano apportate modifiche al prodotto rispetto
alla documentazione tecnica esaminata.
- The following condition may render this
certificate invalid: any technical modification to
the product as regards examined technical
documentation
|
Termini e condizioni di validità
La responsabilità del prodotto rimane del
fabbricante, del suo rappresentante o, in assenza di
un rappresentante, dell'importatore, in accordo con
la Direttiva 2001/95/EC relativa alla Sicurezza
Generale dei Prodotti. Le seguenti condizioni
possono rendere non valido il presente <Computed
Value>: modifiche nella realizzazione del
prodotto, rispetto alla documentazione tecnica
esaminata modifiche o emendamenti alla Direttiva
modifiche o emendamenti negli standard che
costituiscono la base per la conformità documentale
con i requisiti essenziali della Direttiva.
|
Terms and validity conditions
The product liability rests with the manufacturer, his
representative or, in the absence of a representative,
the importer, in accordance with the General Product
Safety Directive 2001/95/EC The following conditions may
render this <Computed Value> invalid: Changes in
construction of the product as regards the examined
technical file Changes or amendaments to the Directive
Changes or amendaments in the standards with form basis
for documenting compliance with the essential
requirements of the Directive. |
|
**** NOTICE: This is NOT an official certificate **** |
|
|