EZ Path Marine Cable Transits consist of heavy gauge, galvanized steel shells containing
self-adjusting intumescent liners. The shell dimensions for the MDM150, MDM300 and
MDM400 transits are as follows:
MDM150: 150mm wide x 75mm high x 150mm long (6” x 3” x 6”)
MDM300: 75mm wide x 75mm high x 267mm long (3” x 3” x 10-1/2”)
MDM400: 102mm wide x 118mm high x 356mm long (4” x 4-5/8” x 14”)
Steel mounting plates are secured around the shells to facilitate attachment to the division.
Mounting plate designs allow modular units to be installed individually or in ganged
configurations with multiple units per opening.
Installations as per manufacturer instruction.
Field of Application
The transits are intended for single and multi-cable penetrations through A-0 – A-60 Class,
non-watertight steel or aluminum bulkheads or decks and A-0 – A-60 Class panel bulkheads.
The transits can accommodate 0 – 100% visual cable fill.
The transits are to be installed and insulated (in addition to the approved insulation arrangements
for the division) as detailed in the following tables:
Attachment to Certificate No. MED325622XG/001 Page 2 of 5

Notes:
MDM400K/L/M may be installed with opening dimensions listed for MDM400A/C/G, respectively.
MDM400N may be installed in 315mm x 126mm opening with 6mm radius at corners.
Attachment to Certificate No. MED325622XG/001 Page 3 of 5

Notes:
MDM400K/L/M may be installed with opening dimensions listed for MDM400A/C/G, respectively.
MDM400N may be installed in 315mm x 126mm opening with 6mm radius at corners.
Attachment to Certificate No. MED325622XG/001 Page 4 of 5
Reference Documents and Tests Carried Out
STI Drawing No. STIM0152 (RINA Doc. No. HMFP/8682), dated 01/26/23 – MDM150,
A-0 – A-60 steel or aluminum bulkhead or deck.
STI Drawing No. STIM0153 (RINA Doc. No. HMFP/8736), dated 07/28/22 – MDM300,
A-0 – A-60 steel bulkhead or deck.
STI Drawing No. STIM0154 (RINA Doc. No. HMFP/8681), dated 01/26/23 – MDM400,
A-0 – A-60 steel bulkhead or deck and A-0 – A-60 panel bulkhead.
STI Drawing No. STIM0178 (RINA Doc. No. HMFP/8737), dated 10/24/22 – MDM400,
A-0 – A-60 steel bulkhead .
Testing References filed with RINA Doc. No. HMFP/8735.
Test Reports filed with RINA Doc. No. HMFP/6608, HMFP/8727-8734.
Reference is to be done also to technical drawings, test reports and data filed with letter RINA
letter HMFP/2017/00025/LCAIV.
Remarks
1. All penetrations are to be insulated to same fire class as bulkhead and deck. Other applications
are subject to case-by-case approval. The insulation materials are to be approved.
2. In A-0, A-15 and A-30 divisions, where the configuration is not described in the tables, the
transit is to be insulated per the A-60 design on the penetration itself and for 200mm around.
3. Production items are to be manufactured in accordance with a quality control system which
shall be maintained to ensure that items are of the same standard as the approved prototype.
4. These types of penetrations are not suitable for tank boundaries and where the penetrations
are subject to frequent immersion in fluids. Such scope is to be considered on case-by-case basis.
5. The validity of this Certificate ceases in the case of amendments to the rules on the basis of
which the Certificate was issued.