Single leaf hinged door whose maximum clear opening size is 1000 mm wide and 2100 mm high. The door leaf, having maximum width of 1064 mm, height of 2164 mm and thickness of 61 mm, is composed moving from the exposed side, of a carbon steel plate 3 mm thick, one layer of ceramic fiber and a carbon steel plate 8 mm thick having the edges bended to the rabbet; between the two steel plates are provided stiffeners, welded to the 8 mm thick steel plate, composed by four horizontal “L” steel profiles 50x50x6 mm and one vertical steel plate 50x9 mm. The 3 mm thick steel plate is fixed with 26 screws M6x12mm. Inside the leaf is fitted an insulating material composed by a layer of ceramic fiber (certified not combustible in conformity to the requirements of the IMO FTP Code), 20 mm thick having density of 170 kg/m3. The door frame, welded to the unexposed side of the bulkhead, is composed by a carbon steel “L” profile having dimensions of 100x75x10 mm and a carbon steel “L” profile 38x38x5 mm on which, in the inner side, are provided fireproof sealing strips 20x4 mm type 8935 provided by Shanghai Jiar Fu Decoration Material Company Ltd; on the lateral side are installed three steel hinges. The door is equipped with a lever closing device that acts on six points, fitted on the side exposed to the fire and actuated by a handle. The closure is made tight with neoprene gaskets, provided by Haida-MacGregor Jiangyin Sealing Co., Ltd, having dimensions of 40x20 mm fitted along the perimeter between the frame and the leaf rabbet. The leaf may be fitted with rectangular window having maximum clear size of 300x400 mm having radiused corners with radius of 100 mm. The pane, type Cesium Potassium monolitich glass, having thickness of 12 mm provided by Yixing Yushi Special Glass Co., Ltd, is held in place by means of two symmetrical steel frame S shaped profiles having thickness of 5 mm, dimensions 25x15x13mm, bolted by N.14 M6x65 bolts, fitted with pitch of 85 mm. Between the glass and the frame is provided a 2 mm thick neoprene gasket.
Field of application Fire resistant A-0 Class single leaf hinged door.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents Nanjing Lishui Yisheng Ship Fitting Factory drawing No. 124YS01-20-00 attached to the Far East Fire Testing Centre (FEFTC) Test Report No. FT12288 issued on 23 November 2012.
Tests carried out Tests as per Far East Fire Testing Centre (FEFTC) Test Report No. FT12288 issued on 23 November 2012 according to 2010 FTP Code Annex 1, Part 3. |