MED153222CS!005ENGD- -  -  N- PROFLEX AR 3/3 FFFP -N- S- S- -28/04/2022- Marine Equipment- - SN- S- - N-  - 537,075B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED153222CS/005- N-Apr 27, 2027537075
 
Form
  Marine Equipment(TO)
MED063424MI/009
Certification N. MED153222CS/005 - (ENG)
Certificate date 28/04/2022
Type Protezione antincendio
Product Expansion foam for fixed fire extinguishing systems for chemical tankers
Item Nº MED/3.59

Model or Denomin.
Items
PROFLEX AR 3/3 FFFP
Applicant PROFOAM SRL
Place of requester VIA MARCONI, 21  %  28060 San Pietro Mosezzo (NO)  % ITALY
Tel. N.,Fax, Email 0321 485511, 0321 485522, ---
Directive (EU) 2021/1158
Standards IMO MSC.1/Circ.1312,IMO MSC.1/Circ.1312/Corr.1
Reference Documents IMO Res.MSC.4(48) (IBC Code) Ch.11,IMO MSC/Circ.553
Request 12/04/2022
Expire date 27/04/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Paolo Brocca S

EC TYPE EXAMINATION (MODULE B)
No. MED153222CS/005

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.59
Description Expansion foam for fixed fire extinguishing systems for chemical tankers
Type PROFLEX AR 3/3 FFFP
Applicant PROFOAM SRL
VIA MARCONI, 21,28060 San Pietro Mosezzo (NO),ITALY
Testing standards applied IMO MSC.1/Circ.1312,IMO MSC.1/Circ.1312/Corr.1
Regulations specified and reference documents IMO Res.MSC.4(48) (IBC Code) Ch.11; IMO MSC/Circ.553
Issued in Genoa on
This Certificate is valid until
April 28, 2022
April 27, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
No.  MED153222CS/005
Page 1 of 2
Technical Characteristics

Foam Concentrate PROFLEX AR 3/3 FFFP
Type of foam concentrate Low-Expansion Film Forming Fluoroproteinic Alcohol Resistant Foam
- Type A
Mixing Ratio 3 %
Density at 20°C 1.10 g/ml
Viscosity at 20°C 1.300 cP
pH at 20°C 6 - 8
Lowest Temperature for Use £ -15°C
Spreading Coefficient ≥ 0
Expansion Ratio at 20°C ≥ 6
Drainage 25% > 4'

Field of application

Fixed foam fire extinguishing systems using low expansion foam concentrate for extinguishing fires of following products at ambient temperature and pressure:
  • Chemical Products as per list of Chapter 17, International Bulk Chemical Code (column L - letters A, B and D);
  • Chemicals to which neither IBC nor BCH Codes apply, as per list set out in IMO Circular MSC/Circ.553.
Tests carried out

According to IMO Circulars MSC/Circ.1312 Guidelines for the performance and testing criteria, and surveys of low-expansion foam concentrates for fixed fire-extinguishing systems" and corrigenda in MSC.1 / Circ. 1312/Corr.01, and MSC/Circ. 553 "Information on flashpoint and fire-fighting media for chemicals to which neither the IBC Code nor the BCH Code apply".
Technical Documentation
  • File n. 2012/CS/01/1550 and attached Test Reports n. 2012/1550 [Pg.1 and 2a), 2b), 2c)].




ATTACHMENT TO
No. MED153222CS/005
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****