MED036722CS!002ENGF- -  -  N- SUBFLEX -N- S- S- -02/02/2022- Marine Equipment- - SN- S- - N-  - 892,377B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED036722CS/002- N-Feb 1, 2027892377
 
Form
  Marine Equipment(TO)
Certification N. MED036722CS/002 - (ENG)
Certificate date 02/02/2022
Type Protezione antincendio
Product Sottofondo di copertura del ponte di coperta
Item Nº MED/3.1
USCG Category N° 164.106

Model or Denomin.
Items
SUBFLEX
Applicant ERREDIBI SRL
Place of requester VIA PAZZIGNO 117  %  80146 Napoli (NA)  % ITALY
Tel. N.,Fax, Email 081 7520792, 081 7520595, ---
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 28/1/2022
Expire date 01/02/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED036722CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.1
USCG Category Nº 164.106
Description Primary decks covering
Type SUBFLEX
Applicant ERREDIBI SRL
VIA PAZZIGNO 117,80146 Napoli (NA),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
February 2, 2022
February 1, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED036722CS/002
Page 1 of 2

Product description



Primary deck covering composed of three layers:
1st layer – synthetic rubber based latex and cement mixture named Subflex Bond Coat (mass per area 0.0008 kg/dm2 – thickness 0.1 mm);
2nd layer – synthetic rubber based latex, cement and silico-calcareous inerts layer named Subflex Sottofondo (mass per area 0.018 kg/dm2 ÷ 0.128 kg/dm2 – thickness 2.8 mm ÷ 19.7 mm);
3rd layer – synthetic rubber based latex, cement and silico-calcareous inerts finishing layer named Subflex Grot Coat (mass per area 0.0017 kg/dm2 – thickness 0.2 mm).
  • Mass per area range (kg/dm2): 0.0205 ÷ 0.1305
  • Thickness range (mm): 2 ÷ 20


Field of application

As primary deck covering.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 of IMO 2010 FTP Code.

Tests carried out

Tests as per RINA Test Laboratory report No. 2006CS012911/2 dated 5 February 2007 issued according to IMO Res. A.687(17).




ATTACHMENT TO
CERTIFICATE No. MED036722CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****