MED090925CS!009ENG- -  -  N- BANNOH 500 + 2 UNYMARINE finish -N- S- S- -24/03/2025- Marine Equipment- - SN- S- - N-  - 412,216B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED090925CS/009- N-Mar 23, 2030412216
 
Form
  Marine Equipment(TO)
Certification N. MED090925CS/009 - (ENG)
Certificate date 24/03/2025
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Item Nº MED/3.18b
USCG Category N° 164.112

Model or Denomin.
Items
BANNOH 500 + 2  UNYMARINE finish
Applicant CHUGOKU-BOAT ITALY S.P.A.
Place of requester VIA MACAGGI 19/10  %  16121 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0105500235, 0105500288, m.zanone@chugoku-boat.it
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Request 26/02/2025
Expire date 23/03/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED090925CS/009

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.18b
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (b) paint systems
Type BANNOH 500 + 2  UNYMARINE finish
Applicant CHUGOKU-BOAT ITALY S.P.A.
VIA MACAGGI 19/10,16121 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/6, SOLAS 74 Reg. X/3, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ.1120.
Issued in Genoa on
This Certificate is valid until
March 24, 2025
March 23, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED090925CS/009
Page 1 of 2

Product description



Painting system composed of 3 layers:
1st layer: epoxy primer named “BANNOH 500” (humid mass per area: 315 g/m², dry thickness: 0.150 mm);
2nd layer: polyurethane finish paint named “UNYMARINE FINISH” (humid mass per area: 180 g/m², dry thickness: 0.080 mm);
3rd layer: polyurethane finish paint named “UNYMARINE FINISH” (humid mass per area: 180 g/m², dry thickness: 0.080 mm);
  • Humid mass per area (g/m2): 675 ± 20%
  • Dry thickness (mm): 0.310 ± 20%
Field of application

As finishing material for all exposed interior and concealed or inaccessible surfaces. The product may be applied to any metallic support having a thickness ³ 1.5 mm.

On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.

Tests carried out

Tests as per RINA Test Laboratory reports No. 2015CS01763/6 dated 19 March 2015 and No. 2015CS01763/11 dated 30 March 2015 issued according to:
  • IMO 2010 FTP Code Part 5;
  • ISO 1716: 2010.




ATTACHMENT TO
CERTIFICATE No. MED090925CS/009
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****