DIP083624XT!002ENG- -  -  N- WATERTIGHT STEEL FLUSH HATCH -N- S- S- -04/07/2024- Prodotti per nautica diporto- - NN- N- - N-  - 166,397BbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP083624XT/002- N-Mar 26, 2027166397
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP083624XT/002 - (ENG)
Certificate date 04/07/2024
Product Boccaportelli stagni

Model or Denomin.
Items
WATERTIGHT STEEL FLUSH HATCH
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
Place of requester AYDINLI BIRLIK OSB MAH., BATI CAD., NO.28 34953 TUZLA, ISTANBUL , TURKEY
Tel. N.,Fax, Email +90 216 466 4619, +90 216 466 4621, ---
Directive NONE
Standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Expire date 26/03/2027
Head Office ISTANBUL
CERTIFICATO DI OMOLOGAZIONE ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. DIP083624XT/002
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Description Watertight hatches
Type WATERTIGHT STEEL FLUSH HATCH
Reference standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
  

 
 




   .   This Certificate is valid until March 26, 2027
_________________________________
RINA Services S.p.A.
Alper Tek
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATO DI OMOLOGAZIONE DI TIPO
N. DIP083624XT/002
Allegato - Pagina 1/1
WATERTIGHT STEEL FLUSH HATCH
Reference documents:
- Job nr. 2024/XT/01/836.

Product Description:
- Watertight hatches:
500 x 500 mm - 600 x 600 mm with 4 dogs and 2 hinges
600 x 600 mm - 750 x 750 mm with 5 dogs and 2 hinges
750 x 750 mm - 900 x 900 mm with 6 dogs and 3 hinges

- See drawings approved with ISDP-9837, ISDP-11221, ISDP-11222.
- If the same construction materials, as per approved a.m. drawings, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 500 and 900 mm and long side between 500 and 900 mm
in compliance with the stricter requirement (for the number of dogs and hinges) of the a.m. hatch types.
- The hatches are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness".
- Hatches suitable for an hydraulic pressure of 3.0 m head.
- Hatches fitted on escape ways are to be openable by both sides (handles are to be permanently fixed).


Fields of application:
- Watertight hatches for "RINA Rules for the Classification of Yachts designed for Commercial Use" and "RINA Rules for the Classification of Pleasure Yachts".

ISTANBUL 05.07.2024
**** NOTICE: This is NOT an official certificate ****