MED129322CS!001ENGD- -  -  N- EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR DEEP FAT COOKING EQUIPMENT -N- S- S- -30/03/2022- Marine Equipment- - SN- S- - N-  - 491,066B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED129322CS/001- N-Mar 29, 2027491066
 
Form
  Marine Equipment(TO)
Certification N. MED129322CS/001 - (ENG)
Certificate date 30/03/2022
Type Protezione antincendio
Product Nozzles for deep fat cooking equipment fire extinguishing systems (automatic or manual type)
Item Nº MED/3.43

Model or Denomin.
Items
EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR DEEP FAT COOKING EQUIPMENT
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
Place of requester VIA MARIO NATALUCCI 6  %  60131 Ancona (AN)  % ITALY
Tel. N.,Fax, Email 3453666651, +39 071 2865099, fabrizio.raffaelli@valvitalia-fire.com
Directive (EU) 2021/1158
Standards ISO 15371: 2015
Reference Documents Reg. II-2/1, Reg II-2/10, IMO Res.MSC.97(73)-(2000 HSC Code) 7, IMO MSC.1/Circ.1433.
Request 20/02/2017
Expire date 29/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Giovanni Carratino S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED129322CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.43
Description Nozzles for deep fat cooking equipment fire extinguishing systems (automatic or manual type)
Type EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR DEEP FAT COOKING EQUIPMENT
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
VIA MARIO NATALUCCI 6,60131 Ancona (AN),ITALY
Testing standards ISO 15371: 2015
Reference standards Reg. II-2/1, Reg II-2/10, IMO Res.MSC.97(73)-(2000 HSC Code) 7, IMO MSC.1/Circ.1433.
Issued in Genoa on
This Certificate is valid until
March 30, 2022
March 29, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED129322CS/001
Page 1 of 2
Product description
Water mist fire extinguishing system for local protection of deep fat cooking equipment.

Main components

Nozzle type
EI-FOG 2IXX0.815
Extinguishing media
Fresh water / Sea water
System activation
Manual/ Automatic
Pipe and fitting
Stainless steel high pressure type
Pump unit supply
(typical)
Voltage: 3x400V
Frequency: 50-60 Hz
Working pressure: 120 bar


Cylinder unit supply
(typical)
Nozzle quantity
Water quantity
Nitrogen quantity
1
3 lt
3 lt
2
7 lt
4 lt
3
14 lt
7 lt
4
14 lt
7 lt
Nozzle installation requirements
Projection
Downwards
Maximum cooking area protected by a single nozzle
1.1 m²
Maximum distance from the fryer surface
1300 mm
Minimum distance from the fryer surface
1100 mm
K factor
0.88
Minimum working pressure
53 bar
Reference documents
  • Deep fat cooking equipment fire extinguishing system ,"Use and Maintenance Manual, Rev.1" edit by Eusebi Impianti and filed by RINA with n° CSST 8604
  • Deep fat cooking equipment fire extinguishing system , "Mechanical datasheet" edit by Eusebi Impianti and filed by RINA with n° CSST 2291
  • Test Report " Eusebi Impianti EI-MIST system with EI Fog nozzle for deep fryers, n° 171/C, issued by Laboratorio TESI S.r.l. filed by RINA with n° 2008/AN/01/459 (CSST 2292)
  • Technical system drawings, 6482MA21/MA22/MD17 filed by RINA with n° CSST 2293.
  • Head nozzle Type EI-Fog 2Ixx0.815 issued by Eusebi Impianti and approved by Rina with n° CSST 14706.
This certificate annuls and replaces the certificate No. MED048817CS/001 dated 03/05/2017.




ATTACHMENT TO
CERTIFICATE No. MED129322CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****