MED077923CS!003ENGD- -  -  N- ELBA -N- S- S- -09/03/2023- Marine Equipment- - SN- S- - N-  - 348,851B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED077923CS/003- N-Mar 8, 2028348851
 
Form
  Marine Equipment(TO)
Certification N. MED077923CS/003 - (ENG)
Certificate date 09/03/2023
Type Mezzi di salvataggio
Product Lifebuoys
Item Nº MED/1.1

Model or Denomin.
Items
ELBA
Applicant CAN-SB MARINE PLASTICS SRL
Place of requester VIA L. IL MORO, 27   46040 Casalmoro (MN)  % ITALY
Tel. N.,Fax, Email 0376 737031, 0376 737265, info@cansb.com
Directive (EU) 2022/1157
Standards IMO Res. MSC 81(70) as amended
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.
Request 01/03/2023
Expire date 08/03/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED077923CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.1
Description Lifebuoys
Type ELBA
Applicant CAN-SB MARINE PLASTICS SRL
VIA L. IL MORO, 27 46040 Casalmoro (MN),ITALY
Testing standards IMO Res. MSC 81(70) as amended
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8.
Issued in Genoa on
This Certificate is valid until
March 9, 2023
March 8, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED077923CS/003
Page 1 of 2

Product description

Outer diameter: 736 ± 2%
Inner diameter: 436 ± 2%
Elliptical section: major axis 150 ± 7mm
minor axis 100 ± 7mm
Thickness : 3 mm
Minimum weight of the lifebuoy: 4000 g
Materials: high density polyethylene RIGIDEX HD5502S
Buoyancy material: EURO POL RCC 128P
Grabline made with a braid of high density polyethylene Ø 10 mm
Reference documents

Technical drawing filed by RINA with n° CSST 2375.

Tests carried out
Report n° 2008/CS/01/5410 issued by RINA on 03/12/2008

Drop test from 60 mt witnessed and filed by RINA with n° 2013/CS/01/361

Field of application

Maximum installation height: 60 mt.
The lifebuoy is intended to operate the quick-release arrangement for the self-activated smoke signal and self-igniting light, attached to the lifebuoy body.




ATTACHMENT TO
CERTIFICATE No. MED077923CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****