Double leaf hinged door whose maximum clear opening size is 1985 mm wide and 2100 mm high. The door leaves, having maximum width of 931 mm (primary leaf) and 1085 mm (secondary leaf), maximum height of 2116 mm and thickness of 64 mm, are composed of two stainless steel sheets, 2 mm thick each and, in between, a layer of insulating material type FireMaster Marine Plus blanket having thickness of 60 mm and density of 128 kg/m3. Each leaf is fitted with two L shaped steel stiffeners, 2 mm thick and having dimensions of 20x40 mm tack welded, with pitch of 150 mm, to the sheet opposite to the hinges. The secondary leaf is equipped, on the upper and lower part, with two latches which fix the leaf to the frame and to the sill; the sill is composed of a stainless steel flat, 3 mm thick and having width of 90 mm. The door frame is composed of an L shaped steel profile, having thickness of 3 mm and dimensions of 60x90 mm, bolted to the bulkhead by means of M8 bolts, fitted with pitch of 300 mm. The secondary leaf may be fitted with drop down gasket. The primary leaf may be fitted with a self closing hose port having maximum clear opening size of 150x150 mm.
The product may be also manufactured by:
Baggerød AS - Nevredei 8, Building 30D, 3183 Horten (Norway).Field of application Fire resistant A-60 Class double leaf hinged door for general application. Fire resistant A-30 Class double leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested;
- door used with a fire tested frame design.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.Reference documents BAGGERØD drawing No. 20918-001 dated 12 September 2016 approved on 26 October 2016 with endorsement No. LABS- 1358.Tests carried out Tests as per RINA Test Laboratory Report No. 2016CS013022 issued on 26 October 2016 according to IMO 2010 FTP Code Part 3 and to IMO MSC.1/Circ. 1319 dated 11 June 2009. |